Script to build Apache httpd, mod_fcgi, mod_fastcgi, mod_php and PHP 5.4.3 + FPM on WebFaction. More info: http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/

build_httpd_php-fpm.sh

#!/bin/bash
# This program is free software. It comes without any warranty, to
# the extent permitted by applicable law. You can redistribute it
# and/or modify it under the terms of the Do What The Fuck You Want
# To Public License, Version 2, as published by Sam Hocevar. See
# http://sam.zoy.org/wtfpl/COPYING for more details. */ 

# Usage: sh build_httpd_php-fpm.sh INSTALL_DIR PORT_NUM
# Example: sh build_httpd_php-fpm.sh $HOME/webapps/custom_apache 12345

# This script builds a MPM Worker or MPM Prefork Apache HTTPD + 
# mod_fcgid + mod_fastcgi + mod_php + PHP 5.4.3 with cgi, FastCGI, and PHP-FPM.
# Before you run this, create a "Custom app (listening on port)" from the 
# WebFaction Control Panel and use the port number that is assigned to you. 

# Author: Daniel Graziotin <http://task3.cc>, happy WebFaction customer
# Script Page: <http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/>
# This script takes inspiration from:
# - build_php_worker.sh by Christopher Sebastian 
#   See: <http://wiki.webfaction.com/attachment/wiki/MiscellaneousFiles/build_php_worker.sh>
# - http://community.webfaction.com/questions/7959/how-did-i-install-my-own-phpcurlopenssl-for-use-with-the-shared-web-server
# - http://directadmin.com/forum/showthread.php?t=41879 for the IMAP and x86_64 problem
#   Used the same approach to fix tidy for x86_64


# Stop this script if an error occurs:
set -o errexit
set -o nounset

# Make sure we received the correct number of arguments:
if [ $# -ne 2 ]; then
    echo "Usage: sh `basename $0` INSTALL_DIR PORT_NUM"
    exit 1
fi

INSTALL_DIR=$1
PORT_NUM=$2
USERNAME=`id -un`

SRC_DIR=$INSTALL_DIR/.src


# Sanity Checks:
# Make sure PORT_NUM is a number, and that it is a sane value.
if echo "$PORT_NUM" | grep "[^0-9]" > /dev/null 2>&1  ||  [ $PORT_NUM -lt 1025 ]; then
    echo "You should be installing this on a port number higher than 1024."
    echo "Use the port that is assigned to you by the WebFaction Control Panel."
    echo "Aborting."
    exit 3
fi

if [ "${MPM+set}" != "set" ]; then
    MPM=worker
fi

case $MPM in
    worker) ;;
    prefork) ;;
    *) echo "Invalid MPM: $MPM.  Aborting."; exit 4 ;;
esac


echo
echo "This will build an Apache $MPM MPM with CGI, FastCGI (+PHP-FPM), and mod_php."
echo "It will be installed to $INSTALL_DIR and configured to run on port $PORT_NUM."

if [ "${KEEP_SRC+set}" != "set" ]; then
    # If a previous source dir exists, keep it by default:
    if [ -d $SRC_DIR ]; then
        KEEP_SRC=1
    fi
    if [ "${KEEP_SRC+set}" != "set" ]; then
        echo
        echo "The source code will NOT be kept.  Set the KEEP_SRC environment variable to keep it."
    fi
fi


echo
echo "This process will take between 40 and 60 minutes"
echo "Starting in 30 seconds.  Press CTRL-C to abort."
sleep 20
COUNTDOWN=10
while [ $COUNTDOWN -gt 0 ]; do
    echo "Starting in $COUNTDOWN seconds.  Press CTRL-C to abort."
    sleep 1
    let COUNTDOWN=COUNTDOWN-1  ||  true
done;
echo "Starting..."




if [ ! -d $SRC_DIR ]; then
    echo "Creating necessary directories..."
    mkdir -p $SRC_DIR
fi

# Convert INSTALL_DIR to an absolute path:
INSTALL_DIR=`cd $INSTALL_DIR; pwd -P`
SRC_DIR=$INSTALL_DIR/.src
export LD_LIBRARY_PATH="$INSTALL_DIR/lib${LD_LIBRARY_PATH+:${LD_LIBRARY_PATH:-}}"
echo "Absolute path of INSTALL_DIR = '$INSTALL_DIR'."
echo "Absolute path of SRC_DIR = '$SRC_DIR'."
echo "LD_LIBRARY_PATH = $LD_LIBRARY_PATH"
sleep 5

echo "Building OpenSSL... (a prerequisite of imap-ssl, curl and PHP)"
cd $SRC_DIR
ls openssl-1.0.0j.tar.gz ||  wget http://www.openssl.org/source/openssl-1.0.0j.tar.gz
md5sum openssl-1.0.0j.tar.gz | grep cbe4ac0d8f598680f68a951e04b0996b
ls -d openssl-1.0.0j  ||  tar xfz openssl-1.0.0j.tar.gz
cd openssl-1.0.0j
./config --prefix=$INSTALL_DIR shared `if_worker threads`
make
make install

echo "Building Apache in MPM worker mode..."
cd $SRC_DIR
ls httpd-2.2.22.tar.bz2  ||  wget http://apache.panu.it//httpd/httpd-2.2.22.tar.bz2
md5sum httpd-2.2.22.tar.bz2 | grep 9fe3093194c8a57f085ff7c3fc43715f
ls -d httpd-2.2.22  ||  tar jxf httpd-2.2.22.tar.bz2
cd httpd-2.2.22
./configure --with-mpm=$MPM --with-ldap --enable-mods-shared="all ssl ldap cache proxy authn_alias mem_cache file_cache authnz_ldap charset_lite dav_lock disk_cache" --prefix=$INSTALL_DIR --with-ssl=$INSTALL_DIR/lib
make
make install

echo "Building the mod_fcgid Apache module..."
cd $SRC_DIR
ls mod_fcgid-2.3.7.tar.gz  || wget http://apache.panu.it//httpd/mod_fcgid/mod_fcgid-2.3.7.tar.gz
md5sum mod_fcgid-2.3.7.tar.gz | grep 00644cbe00321e6085e1b9a751a6506e
ls -d mod_fcgid-2.3.7 || tar zxf mod_fcgid-2.3.7.tar.gz
cd mod_fcgid-2.3.7
APXS=$INSTALL_DIR/bin/apxs ./configure.apxs
make
make install

echo "Building the mod_fastcgi Apache module..."
cd $SRC_DIR
ls mod_fastcgi-current.tar.gz  || wget http://www.fastcgi.com/dist/mod_fastcgi-current.tar.gz
md5sum mod_fastcgi-current.tar.gz | grep a21a613dd5dacf4c8ad88c8550294fed
ls -d mod_fastcgi-2.4.6 || tar zxf mod_fastcgi-current.tar.gz
cd mod_fastcgi-2.4.6
$INSTALL_DIR/bin/apxs -c -i -o mod_fastcgi.so -c *.c
# this will host PHP-FPM sockets
mkdir -p $INSTALL_DIR/sockets



echo "Building cURL... (a prerequisite of PHP)"
cd $SRC_DIR
ls curl-7.24.0.tar.gz  ||  wget http://curl.haxx.se/download/curl-7.24.0.tar.gz
md5sum curl-7.24.0.tar.gz | grep b93420f80a2baaa61a0f45214eddc2ba
ls -d curl-7.24.0  ||  tar zxf curl-7.24.0.tar.gz
cd curl-7.24.0
./configure --with-ssl=$INSTALL_DIR/lib --prefix=$INSTALL_DIR `if_worker --enable-thread`
make
make install

echo "Building libtidy... (a prerequisite of PHP)"
cd $SRC_DIR
ls -d tidy  ||  cvs -z3 -d:pserver:[email protected]:/cvsroot/tidy co tidy
cd tidy/build/gmake
sed -i "s@runinst_prefix=/usr/local@runinst_prefix=$INSTALL_DIR@" Makefile
sed -i "s@devinst_prefix=/usr/local@devinst_prefix=$INSTALL_DIR@" Makefile
sed -i "97 s/.*/CFLAGS += -fPIC/" Makefile
make
make install

echo "Building libc-client... (a prerequisite of PHP imap)"
cd $SRC_DIR

#c-client has a really clumsy make file that depends on this:
mkdir -p $INSTALL_DIR/ssl

if [ ! -d $INSTALL_DIR/ssl/include ]; then
    ln -s $INSTALL_DIR/include $INSTALL_DIR/ssl/include
fi
if [ ! -d $INSTALL_DIR/ssl/lib ]; then
    ln -s $INSTALL_DIR/lib $INSTALL_DIR/ssl/lib
fi

ls imap-2007f.tar.gz || wget ftp://ftp.cac.washington.edu/imap/imap-2007f.tar.gz
md5sum imap-2007f.tar.gz | grep 2126fd125ea26b73b20f01fcd5940369
ls -d imap-2007f  ||  tar zxf imap-2007f.tar.gz
cd imap-2007f
sed -i "s@SSLDIR=/usr/local/ssl@SSLDIR=$INSTALL_DIR/ssl@" src/osdep/unix/Makefile
sed -i '57 s/.*/#define FD_SETSIZE 32768/' src/osdep/unix/os_art.c
sed -i '57 s/.*/#define FD_SETSIZE 32768/' src/osdep/unix/os_sv2.c
make clean
make slx EXTRALDFLAGS="-L$INSTALL_DIR/lib -L/usr/local/lib -L/usr/lib -ldl -lcrypt" EXTRAAUTHENTICATORS=gss EXTRACFLAGS=-fPIC

cp c-client/c-client.a $INSTALL_DIR/lib/libc-client.a
mkdir -p $INSTALL_DIR/include/imap
cp c-client/*.h c-client/linkage.c $INSTALL_DIR/include/imap/


echo "Building PHP"
cd $SRC_DIR
ls php-5.4.3.tar.gz || wget http://it.php.net/get/php-5.4.3.tar.gz/from/us.php.net/mirror
md5sum php-5.4.3.tar.gz | grep c9dccc89cc89d39e84f6e6f0cf1c8a65
ls -d php-5.4.3  ||  tar zxf php-5.4.3.tar.gz
cd php-5.4.3

./configure --with-apxs2=$INSTALL_DIR/bin/apxs --prefix=$INSTALL_DIR --with-config-file-path=$INSTALL_DIR/conf --enable-static --enable-shared --with-mysql --with-mysqli --with-pdo-mysql --with-mysql-sock=/var/lib/mysql/mysql.sock --with-pgsql=/usr/pgsql-9.1 --with-pdo-pgsql=/usr/pgsql-9.1 --enable-bcmath --enable-calendar --enable-exif --enable-ftp --enable-mbstring --enable-soap --enable-zip --with-curl=$INSTALL_DIR --with-freetype-dir --with-gd --with-gettext --with-gmp --with-iconv --with-jpeg-dir --with-png-dir --with-regex --with-xmlrpc --with-xsl --with-zlib-dir --with-kerberos --with-mhash --with-openssl=$INSTALL_DIR --without-pear --enable-sockets --enable-intl --with-imap=$INSTALL_DIR --with-imap-ssl=$INSTALL_DIR --with-tidy=$INSTALL_DIR --enable-cgi --enable-fpm

make
make install
libtool --finish $SRC_DIR/php-5.4.3/libs
touch $INSTALL_DIR/conf/php.ini



cat > $INSTALL_DIR/conf/httpd.conf << EOF 
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.
ServerRoot "$INSTALL_DIR"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen $PORT_NUM

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding LoadModule lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by httpd -l) do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule fcgid_module modules/mod_fcgid.so
LoadModule php5_module        modules/libphp5.so
LoadModule fastcgi_module modules/mod_fastcgi.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User $USERNAME
Group $USERNAME

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. [email protected]
#
ServerAdmin [email protected]

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "$INSTALL_DIR/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

<IfModule mod_fastcgi.c>
    # all .php files will be pushed to a php5-fcgi handler
    AddHandler php5-fcgi .php

    #action module will let us run a cgi script based on handler php5-fcgi
    Action php5-fcgi /fcgi-bin/php5.external

    # and we add an Alias to the fcgi location
    Alias /fcgi-bin/php5.external /php5.external
    FastCgiExternalServer /php5.external -socket $INSTALL_DIR/sockets/php5-fpm.socket -appConnTimeout 30 -idle-timeout 60
    # now we catch this cgi script which in fact does not exists on filesystem
    # we catch it on the url (Location)
    <Location /fcgi-bin/php5.external>
        # here we prevent direct access to this Location url,
        # env=REDIRECT_STATUS will let us use this fcgi-bin url
        # only after an internal redirect (by Action upper)
        Order Deny,Allow
        Deny from All
        Allow from env=REDIRECT_STATUS
    </Location>
</IfModule>

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "$INSTALL_DIR/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
 

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "$INSTALL_DIR/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "$INSTALL_DIR/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "$INSTALL_DIR/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

EOF

echo "Creating PHP-FPM configuration"

cat $INSTALL_DIR/etc/php-fpm.conf.default > $INSTALL_DIR/etc/php-fpm.conf 
SOCKET_PATH=$INSTALL_DIR/sockets/php5-fpm.socket
SED_SOCKET_STR="listen=${SOCKET_PATH}"
sed -i "143 s,.*,${SED_SOCKET_STR}," $INSTALL_DIR/etc/php-fpm.conf 

cp -rf $SRC_DIR/php-5.4.3/sapi/fpm/init.d.php-fpm $INSTALL_DIR/etc/init.d.php-fpm 

if [ -d "$SRC_DIR" -a "${KEEP_SRC+set}" != "set" ]; then
 echo "Removing Source Directory: '$SRC_DIR'..."
 rm -rf $SRC_DIR
fi


set +x  # Do not print bash commands before running them.
echo
echo "Done!  :)"
echo
echo
echo "To start the server, run '$INSTALL_DIR/bin/apachectl start'."
echo "To stop the server, run '$INSTALL_DIR/bin/apachectl stop'."
echo "The httpd config file is located at '$INSTALL_DIR/conf/httpd.conf'."
echo "The server logs are located at '$INSTALL_DIR/logs'."
echo "The php.ini default file is located at '$INSTALL_DIR/conf/php.ini'."
echo "The PHP-FPM config file is located at '$INSTALL_DIR/etc/php-fpm.conf'."
echo "You need to manually start PHP-FPM using '$INSTALL_DIR/sbin/php-fpm'"
echo "The default PHP-FPM init file is located at '$INSTALL_DIR/etc/init.d.php-fpm '"
echo
echo "There are several different versions of PHP installed and different ways to process it."
echo "-mod_php"
echo "-mod_fcgi"
echo "-mod_fastcgi"
echo "The default is mod_fastcgi + PHP-FPM"
echo "Now, you should edit the config file (httpd.conf) to suit your needs"
echo "Please note that the default configuration loads many modules. Stip it down."
echo "See http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/ for more info"
echo
set -x  # Print bash commands before running them.