| # | |
| # /etc/sysctl.conf - Configuration file for setting system variables | |
| # See /etc/sysctl.d/ for additional system variables. | |
| # See sysctl.conf (5) for information. | |
| # | |
| #kernel.domainname = example.com | |
| # Uncomment the following to stop low-level messages on console | |
| #kernel.printk = 3 4 1 3 |
| Location | Name | Frequency | Duplex | Offset | Tone | rToneFreq | cToneFreq | DtcsCode | DtcsPolarity | Mode | TStep | Skip | Comment | URCALL | RPT1CALL | RPT2CALL | DVCODE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 462.125000 | 0.000000 | TSQL | 88.5 | 69.3 | 023 | NN | FM | 5.00 | S | ||||||||
| 2 | 462.225000 | 0.000000 | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | |||||||||
| 3 | 462.325000 | 0.000000 | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | |||||||||
| 4 | 462.425000 | 0.000000 | TSQL | 88.5 | 103.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 5 | 462.525000 | 0.000000 | TSQL | 88.5 | 114.8 | 023 | NN | FM | 5.00 | S | ||||||||
| 6 | 462.625000 | 0.000000 | TSQL | 88.5 | 127.3 | 023 | NN | FM | 5.00 | S | ||||||||
| 7 | 462.725000 | 0.000000 | TSQL | 88.5 | 136.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 8 | 462.825000 | 0.000000 | TSQL | 88.5 | 162.2 | 023 | NN | FM | 5.00 | S | ||||||||
| 9 | 462.925000 | 0.000000 | DTCS | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S |
Open $ vim /etc/default/grub then add elevator=noop next to GRUB_CMDLINE_LINUX_DEFAULT. Run $ update-grub and $ cat /sys/block/sda/queue/scheduler to be sure that noop is being used:
$ vim /etc/default/grub
$ update-grub
$ cat /sys/block/sda/queue/scheduler
[noop] deadline cfq