This is a quick-and-dirty guide to setting up a Raspberry Pi as a "router on a stick" to PrivateInternetAccess VPN.
Install Raspbian Jessie (2016-05-27-raspbian-jessie.img) to your Pi's sdcard.
Use the Raspberry Pi Configuration tool or sudo raspi-config to:
| ######################################### | |
| ### BeagleBone Black | |
| ### prebuilt fbtft framebuffer drivers with Linux 3.8.13 kernel | |
| ### working with 1.8" & 2.2" TFT LCD displays | |
| ### | |
| ### Photos: https://plus.google.com/photos/+DrewFustini/albums/6211546193314906001 | |
| ######################################### | |
| Based on: | |
| https://github.com/notro/fbtft/wiki/BeagleBone-Black |
| # path of this file: /etc/apt/sources.list | |
| deb http://ftp.us.debian.org/debian/ jessie main contrib non-free | |
| #deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free | |
| deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free | |
| #deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free | |
| deb http://security.debian.org/ jessie/updates main contrib non-free | |
| #deb-src http://security.debian.org/ jessie/updates main contrib non-free |
| class PWindow extends Frame { | |
| PWindowApp app; | |
| PWindow(int x, int y, int w, int h) { | |
| setBounds(x,y,w,h); | |
| app = new PWindowApp(); | |
| app.setParent(this); | |
| add(app); | |
| app.init(); | |
| show(); |
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
Services declared as oneshot are expected to take some action and exit immediatelly (thus, they are not really services,
no running processes remain). A common pattern for these type of service is to be defined by a setup and a teardown action.
Let's create a example foo service that when started creates a file, and when stopped it deletes it.
Create executable file /opt/foo/setup-foo.sh:
| FulfillmentCenter | Location | Country | SquareFeet | YearOpened | Description of Operation | |
|---|---|---|---|---|---|---|
| PHX3 | 6835 West Buckeye Road, Phoenix, Arizona, 85043 | 1,000,000 | September2007 | Large Sortable Fulfillment CenterOriginally opened at 605,000 Sq. Ft. Expanded by 400,000 Sq. Ft. in Dec. 2011 | ||
| PHX5 | 16920 W. Commerce Dr. , Goodyear, Arizona, 85338-3620 | 1,200,000 | June2008 | Non-sortable Fulfillment CenterOriginally opened at 800,000 Sq. Ft. Expanded to 1.2 Million Sq. Ft + a 230,000 sq ft mezzanine in 2011. | ||
| PHX6TFC1 | 4750 & 5050 West Mohave Street, Phoenix, Arizona, 85043-4428 | 1,207,000 | October 2010 | Large Sortable Fulfillment Center in one half of the buildingSmall Sortable Fulfillment Center in the other half | ||
| PHX7 | 800 N. 75th Ave, Phoenix, Arizona, 85043-3101 | 1,200,000 | September2011 | Small Sortable and Non Sortable Fulfillment Center | ||
| UAZ1 | Phoenix, Arizona, 85001 | 2015 | Prime Now Hub | |||
| ONT2 | 1910 E. Central Ave., Southgate Building 3, San Bernardino, California, 92408-0123 | 951,700 | October 2012 | Small Sortable |
| "FulfillmentCenter", "Location", "Country", "SquareFeet", "YearOpened", "Description of Operation" | |
| "LTN1", "Ridgmont, Marston Gate , Bedfordshire, Milton Keynes, United Kingdom, MK43 0ZA", "", "550,000", "1998", "Originally a 220,000 sq. ft. fulfillment center" | |
| "CWL1", "Ffordd Amazon, Crymlyn Burrows, Jersey Marine, Swansea, Wales, United Kingdom, SA1 8QX ", "", "800,000", "April2008", " " | |
| "EDI4", "Amazon Way, Dunfermline, Fife, Scotland, United Kingdom, KY11 8ST ", "", "1,000,000", "November2011", "Current facility replaced a smaller fulfillment center in Glenrothes which opened in November, 2005 and closed in November, 2011." | |
| "GLA1", "2 Cloch Road, Faulds Park, Gourock, Inverclyde, Scotland, United Kingdom, PA19 1BQ", "", "300,000", "July 2004", " " | |
| "LBA1", "Firstpoint Business Park, Balby Carr Bank, Doncaster, South Yorkshire, United Kingdom, DN4 8DP", "", "412,000", "December2010", "" | |
| "LBA2", "Firstpoint Business Park, Water Vole Way, Doncaster, South Yorkshire, United Kingdom", "", "250,000", "October20 |
| From: http://raspberryperl.com/CouchDB/installCouchDB-1.6.1-on-Pi-2-jessie.txt | |
| ================================================================================ | |
| # Install CouchDB Database on Pi-2 Running Raspbian Jessie | |
| # These instructions are based on those found on this web page: | |
| ( http://jeeonthepi.blogspot.com/2015/09/installing-couchdb-161-on-raspberry-pi.html ) | |
| ========================================================================================== | |
| ########################################################################################## |
