Mike Sannikov Atarity

This workflow is based on my own experience. I publish steps otherwise definitely will forgot it overnight. This working well with toolchain:

I've modeled basic enclosure part which possible to milled with 2.5D router.

	#!/usr/bin/python

	# Light painting / POV demo for Raspberry Pi using
	# Adafruit Digital Addressable RGB LED flex strip.
	# ----> http://adafruit.com/products/306

	import RPi.GPIO as GPIO, time, math

	def fillStrip(strip, stripLength, gamma, t):
	for x in range(stripLength):

	#include <Arduino.h>
	#include <Control_Surface.h>

	USBMIDI_Interface midi; // Instantiate a MIDI over USB interface

	CCButton button {
	8, // Push button on pin 8:
	{MIDI_CC::General_Purpose_Controller_1, CHANNEL_1}, // General Purpose Controller #1 on MIDI channel 1
	};