Bret Stateham BretStateham

Running the IoT Edge (v1) NPM Package Samples on Raspbian Jessie

Currently, on 09/01/2017, the latest Raspbian Stretch release does not work with the Node.js packages. Stretch appears to have a later version of OpenSSL with breaks the gateway. I imagine that dependency will be corrected in the future. For that reason I am specifically using Raspbian Jessie

Flash the last version of Raspbian Jessie (http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip) to your SD card using http://etcher.io
Boot the Pi using the flashed SD card and login as pi/raspberry
Connect the pi to your wifi network if it isn't hardwired

MX Chip Dev Kit Fix Steps

These steps are documented here: https://aka.ms/devkitfix

Open the Board Manager in the Arduino IDE (had problems in code, not sure why), and removed the AZ3166 package.
Delete the files:

%USERPROFILE%\AppData\Local\Arduino15\package_azureboard_index.json
%USERPROFILE%\AppData\Local\Arduino15\package_azureboard_index.json.sig.tmp

Delete the %USERPROFILE%\AppData\Local\Arduino15\Packages\AZ3166 folder
Delete the %USERPROFILE\azure-board-cli folder

Create a particle account at: https://login.particle.io/

Install the particle CLI

npm install -g particle-cli

Login to the CLI using the account you created above:

Running the Azure IoT Device Client for Python Simulated Device Quickstart with Python 2.7 on macOS

Using the following docs as a references:

Installing Python 2.7 using Homebrew (brew)

Ensure Homebrew is installed

Running the Azure IoT Device Client for Python Simulated Device Quickstart with Python 3.7 on macOS

Using the following docs as a references:

Installing Python 3.7 using Homebrew (brew)

Ensure Homebrew is installed

	namespace ContactManager.Web.Models
	{
	using System.ComponentModel;
	using System.ComponentModel.DataAnnotations;

	public class Contact
	{
	public int Id { get; set; }

	[Required]

	using Microsoft.WindowsAzure.Storage.Table;
	using Microsoft.WindowsAzure.Storage.Table.DataServices;
	using System.Linq;

	namespace GuestBook_Data
	{
	public class GuestBookDataContext : TableServiceContext
	{

	public GuestBookDataContext(CloudTableClient client) : base(client)

	#cloud-config
	apt_sources:
	- source: "deb [arch=amd64] https://packages.microsoft.com/repos/azure-cli/ bionic main"
	key: \|
	-----BEGIN PGP PUBLIC KEY BLOCK-----
	Version: GnuPG v1.4.7 (GNU/Linux)

	mQENBFYxWIwBCADAKoZhZlJxGNGWzqV+1OG1xiQeoowKhssGAKvd+buXCGISZJwT
	LXZqIcIiLP7pqdcZWtE9bSc7yBY2MalDp9Liu0KekywQ6VVX1T72NPf5Ev6x6DLV
	7aVWsCzUAF+eb7DC9fPuFLEdxmOEYoPjzrQ7cCnSV4JQxAqhU4T6OjbvRazGl3ag

	# --------- SCRIPT BEGIN ----------
	# By Bret Stateham
	# This script assumes
	# - You are running on a linux machine
	# - You have the can-utils installed and working. See:
	# - https://github.com/linux-can/can-utils
	# - https://www.kernel.org/doc/Documentation/networking/can.txt
	# - You have a can device attached and configured as can0 (you can change the targetbus variable to match if otherwise)
	# - The can device is attached to your running target vehicle

	Use this event hub connection string in the Function:

	Endpoint=sb://flysimbssns.servicebus.windows.net/;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey=gFSsWDqKq+i147KnZ0MSrSd4JUvYwDHYVZn6zJp7TNo=;EntityPath=flysim-shared-input-hub