CountParadox

binary_sensor:
  - platform: gpio
    id: pullswitch
    pin:
      number: 32
      mode: INPUT_PULLUP
  - platform: template
    id: switch_actuated
    internal: true
    lambda: 'return id(pullswitch).state;'

CountParadox

esphome:
  name: sop-power-monitor
  friendly_name: sop-power-monitor

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging

CountParadox

#include <SoftwareSerial.h>

SoftwareSerial mySerial(1, 2);  // RX, TX

// Pin definitions
// START
const int LED_RED_1 = 2;
const int LED_GREEN_1 = 3;
const int SWITCH_1 = 4;

CountParadox

import csv
import os
import xml.etree.ElementTree as ET

# Set the directory containing the dataset files
data_dir = '/path/to/dataset/files/'

# Set the threshold for outlier detection (in standard deviations from the mean)
threshold = 3

CountParadox

#include <SoftwareSerial.h>

SoftwareSerial mySerial(1, 2);  // RX, TX

// Pin definitions
// START
const int LED_RED_1 = 2;
const int LED_GREEN_1 = 3;
const int SWITCH_1 = 4;

CountParadox

#include <SoftwareSerial.h>

SoftwareSerial mySerial(2, 1); // RX, TX

const int LED1_RED = 20;
const int LED1_GREEN = 21;
const int SWITCH_1 = 16;

const int LED2_RED = 7;
const int LED2_GREEN = 8;

CountParadox

const int button[8] = {0, 1, 2, 3, 4, 5, 6, 7};
const int LED[16] = {8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23};

int buttonState[8];

void setup() {
  for (int i = 0; i < 8; i++) {
    pinMode(button[i], INPUT_PULLUP);
  }
  for (int i = 0; i < 16; i++) {

CountParadox

import time
import digitalio
import board
import busio

# Initialize the buttons
buttons = [digitalio.DigitalInOut(board.GPIO0), digitalio.DigitalInOut(board.GPIO1)]

# Initialize the LEDs
leds = [digitalio.DigitalInOut(board.GPIO2), digitalio.DigitalInOut(board.GPIO3),

CountParadox

/*
This program will send USB HID keyboard presses to initiate
a PTT call with system of choice.
 * Press and hold button 1 to activate PTT (Push-to-Talk) functionality.
*/

#include <DigiKeyboard.h> // Library for sending keystrokes as an HID device over USB
#include <OneButton.h>    // Library for button input functions

  OneButton button1(

CountParadox

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or