Connect the SD card to your computer and open the terminal.
- Find the disk id
df -h
- Unmount the disk
sudo diskutil unmount /dev/disk2s2
- Replace
/dev/disk2s2/with/dev/rdisk2(it might not be disk2s2, verify first!)
sudo dd bs=1m if=~/Downloads/archlinuxarm-13-06-2012\ 2/archlinuxarm-13-06-2012.img of=/dev/rdisk2
Before booting the SD in the Raspberry Pi, let's check if ipv6 is enabled, this was a source of troubles for me, specially when dealing with ufw, so cd into the SD's root:
nano /boot/cmdline.txt
make sure you have: ipv6.disable=0
Foundation's changed the basic geometry to support the NOOBS install. For instructions on how to expand the partition please visit this tutorial
If you worry of your's SD life, you should consider read this answer on stackexchange, to know more about extending the life of your SD card.
pacman -Syu
pacman -S linux-raspberrypi-latest
pacman -Sy base-devel
pacman -Sy core/dnsutils
pacman -Sy extra/python2
pacman -Sy extra/python2-pip
pacman -Sy extra/python2-lxml
pacman -Sy sudo vim zsh
sudo pip2 install mitmproxy
hostnamectl set-hostname myhostname
- Assuming the username is couto and it has
sudoprivileges wheel and uses the/bin/zshshell instead of/bin/bash
useradd -m -g users -G wheel -s /bin/zsh couto
chfn couto
passwd couto
- to allow the wheel group to have
sudoprivileges:
visudo
## Uncomment to allow members of group wheel to execute any command
%wheel ALL=(ALL) ALL
Install Nodejs from source
ln -s /usr/bin/python2 /usr/bin/python
git clone git://github.com/joyent/node.git && cd node && git checkout v0.8.8
./configure --shared-openssl --without-snapshot
make
sudo make install
Depending on the use you might want to consider some advice
- Ubuntu tips (ufw is quite useful)