GluTbl

import json
from typing import List, Dict, Any

from qprompt import Menu


class QpromptMenu:

    def __init__(self, header: str, data: List[Dict[str, Any]], key_to_show):
        self._data = data

GluTbl

echo "Usb power status:"
echo ""
sudo cat /sys/bus/usb/devices/*/power/level
echo ""
echo ""

while true; do
    read -p "Do you wish to change usb power status? " yn
    case $yn in
        [Yy]* ) make install; break;;

GluTbl

sudo apt update
sudo apt-get install tigervnc-scraping-server
mkdir -p ~/.vnc
vncpasswd
x0vncserver -passwordfile ~/.vnc/passwd -display :0

GluTbl

#!/usr/bin/python3

"""
You need to know the "Z_axis" value of the last saved value
You can save it using the serial data transmited by the 3D printer

For me i use qprompt and pass some data and extract the z axis

"""

GluTbl

start_millis =int(datetime.strptime(start_time, "%d-%m-%Y-%H:%M:%S").replace(tzinfo=timezone.utc).timestamp() *1000)

GluTbl

All honour goes to http://www.blaicher.com/2013/01/accessing-an-encrypted-full-disc-image-lukslvm/

---

So I typically use a full disc encryption with LVM over LUKS. So assume you have got an image from your harddisk via

dd if=/dev/sda of=image.img

GluTbl

//For digital pins
#define DIGITAL_PIN_COUNT 12
char *digital_pins[] = {"D0", "D1", "D2" , "D3" , "D4" , "D5", "D6", "D7", "D8", "D9", "D10", "D11", "D12", "D13"};
int *valid_digital_pins[] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13};
////////////////////////

//For Aanlogue pin
#define ANALOG_PIN_COUNT 6

GluTbl

import shlex
import subprocess

def execute_command(command: str, path=None):
    command_splited = shlex.split(command)
    if path is None:
        process = subprocess.Popen(command_splited)
    else:
        process = subprocess.Popen(command_splited, cwd=path)
    process.communicate()

GluTbl

################Executing Command################


def execution_timer(time_out, cmd_process):
    kill = lambda process: process.kill()
    my_timer = Timer(time_out, kill, [cmd_process])
    try:
        my_timer.start()
        stdout, stderr = cmd_process.communicate()
    finally:

GluTbl

#Source code copied from https://github.com/andrisdru/image2stl



#pip3 install numpy-stl pillow argparse
import argparse
import numpy as np
from stl import mesh
from PIL import Image