u-hori HoriLiu

Each of these commands will run an ad hoc http static server in your current (or specified) directory, available at http://localhost:8000. Use this power wisely.

Discussion on reddit.

Python 2.x

$ python -m SimpleHTTPServer 8000

VirtualBox Host-Only Static IP

My typical setup for a development box in VirtualBox uses two NICs. The first uses NAT to allow the box to communicate with the outside world through my host computer’s network connection. (NAT is the default, so shouldn't require any setup.) The second is a "host-only" connection that allows my host and guest to interact.

To create a host-only connection in VirtualBox, start by opening the preferences in VirtualBox. Go to the "Network" tab, and addd a Host-only Network. Modify the host-only network, and disable DHCP. Make a note of the IP address. (Feel free to set the IP address as well, if you like.)

Next, assign this host-only adapter to the virtual machine. Select the VM and press "Settings". Go to the "Network" tab, and select "Adpater 2". Enable the adapter, set it to a "Host-only Adapter", and select the adpater you created above.

Temporary

How to generate and apply patches with git?

It sometimes happen you need change code on a machine from which you cannot push to the repo. You’re ready to copy/paste what diff outputs to your local working copy.

You think there must be a better way to proceed and you’re right. It’s a simple 2 steps process:

1. Generate the patch:

git diff &gt; some-changes.patch

Getting a USB device to show up in a Docker container on OS X

Some background

I was trying to get the Arduino IDE to work inside a Docker container on OS X. I was able to get the IDE working (see Getting X11 GUI applications to work on OS X with Docker), but I could not figure out how to make the USB port for the Arduino visible.

The solution

I first tried to directly map hardware serial port into the Docker container, doing something like this:

Installing Apache Superset on Windows 10

⚠️ WARN: This doc might be outdated. Use with caution. Only tested with Python v3.7

🙋‍♂️ INFO: If you have fixes/suggestions to for this doc, please comment below.

🌟 STAR: This doc if you found this document helpful.

🚀 Recommended Installation (Auto-Installer)

The easiest and community-recommended way to install Antigravity CLI on Termux is using the standalone auto-installer.

curl -fsSL https://raw.githubusercontent.com/wallentx/antigravity-cli-termux/dev/install.sh | bash

How it works: This script instantly installs the latest release directly from the wallentx/antigravity-cli-termux repository. A huge thanks to the original repository owner, @wallentx, for packaging these releases! The repository automatically runs a GitHub Action every six hours that fetches the official binary and patches it using the exact methods outlined in this guide below.

	# 中西文切換鍵的默認設置寫在 default.yaml 裏面
	# 以下的 default.custom.yaml 在全局範圍重定義該組快速鍵
	#
	# 可用的按鍵有 Caps_Lock, Shift_L, Shift_R, Control_L, control_R
	# Mac 系統上的鼠鬚管不能區分左、右，因此只有對 Shift_L, Control_L 的設定起作用
	#
	# 已輸入編碼時按切換鍵，可以進一步設定輸入法中西文切換的形式。
	# 可選的臨時切換策略有三：
	# inline_ascii 在輸入法的臨時西文編輯區內輸入字母、數字、符號、空格等，回車上屏後自動復位到中文
	# commit_text 已輸入的候選文字上屏並切換至西文輸入模式

	----------------------------------------------------------------------
	# Processor module template script
	# (c) Hex-Rays
	import sys
	import idaapi
	from idaapi import *


	# define RAM starting at 18000h of size 100h
	# define ROM starting at 0 of size 12100h

	#sudo apt-get install ibus

	#Install RIME
	sudo apt-get install ibus-rime

	#Install bopomofo IME
	sudo apt-get install librime-data-terra-pinyin librime-data-bopomofo

	#Config in Home directory
	~/.config/ibus/rime