Edward Shin Hylian

Disclaimer: Please follow this guide being aware of the fact that I'm not an expert regarding the things outlined below, however I made my best attempt. A few people in IRC confirmed it worked for them and the results looked acceptable.

Attention: After following all the steps run gdk-pixbuf-query-loaders --update-cache as root, this prevents various gdk-related bugs that have been reported in the last few hours. Symptoms are varied, and for Cinnamon the DE fails to start entirely while for XFCE the icon theme seemingly can't be changed anymore etc.

Check the gist's comments for any further tips and instructions, especially if you are running into problems!

Screenshots

Results after following the guide as of 11.01.2017 13:08:

Sync your favourited photos from your iOS device

Dependencies

brew.sh

brew install libimobiledevice
brew cask install osxfuse
brew install ifuse

Rust embedded notes

A place to jot down useful notes. Most if not all of this was lifted from the linked references, but I'm copying some of the highlights down here for my own reference.

Glossary

peripheral access crate (PAC): device crate (e.g. stm32f4) created using the svd2rust crate that presents an API to access a particular microcontroller's registers
hardware abstraction library (HAL) crate: higher-level abstraction on top of the PAC. This follows

Recommended Extentions:

uBlock Origin

https://addons.mozilla.org/en-US/firefox/addon/ublock-origin/

Settings

Make sure the following options are off:

Disable pre-fetching

	#!/usr/bin/python
	# coding=utf-8
	# "DATASHEET": http://cl.ly/ekot
	from __future__ import print_function
	import serial, struct, sys, time

	DEBUG = 1
	CMD_MODE = 2
	CMD_QUERY_DATA = 4
	CMD_DEVICE_ID = 5

	#! /usr/bin/env ruby

	# Copyright © 2016 Quentin "Sardem FF7" Glidic
	#
	# Permission is hereby granted, free of charge, to any person obtaining a copy
	# of this software and associated documentation files (the "Software"), to deal
	# in the Software without restriction, including without limitation the rights
	# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
	# copies of the Software, and to permit persons to whom the Software is
	# furnished to do so, subject to the following conditions:

	from itertools import *
	from operator import *
	convertValue, convertHouse = {'A': 1, '2': 2, '3': 3, '4': 4, '5': 5, '6': 6, '7': 7, '8': 8, '9': 9, 'T': 10, 'J': 11, 'Q': 12, 'K': 13}, {'D': 0, 'C': 1, 'H': 2, 'S': 3}
	def addcard(n, h):
	if len(h) <= 1 and filter(lambda x: x[0] != 0, h) == 0: h.append((0, n))
	else:
	for c in h:
	if c[0] == 2 and c[1][0][1] == n[1] and (convertValue[c[1][0][0]] == convertValue[n[0]]+1 or convertValue[c[1][2][0]] == convertValue[n[0]]-1):
	h.append((3, c[1] + [n]))
	h.remove(c)