JeremySCook

/*
 * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
 * An IR detector/demodulator must be connected to the input RECV_PIN.
 * Version 0.1 July, 2009
 * Copyright 2009 Ken Shirriff
 * http://arcfn.com
 * modified for light indicator JSCook 5/12/2020
 */

#include <IRremote.h>

JeremySCook

/*
 * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
 * An IR detector/demodulator must be connected to the input RECV_PIN.
 * Version 0.1 July, 2009
 * Copyright 2009 Ken Shirriff
 * http://arcfn.com
 * modified for light indicator and response to different buttons JSCook 5/12/2020
 */

#include <IRremote.h>

JeremySCook

##
 #  @filename   :   main.cpp
 #  @brief      :   2.9inch e-paper display (B) demo
 #  @author     :   Yehui from Waveshare
 #
 #  Copyright (C) Waveshare     July 31 2017
 #
 # Permission is hereby granted, free of charge, to any person obtaining a copy
 # of this software and associated documnetation files (the "Software"), to deal
 # in the Software without restriction, including without limitation the rights

JeremySCook

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32

JeremySCook

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32

JeremySCook

//modified from info/code found here: https://wiki.seeedstudio.com/Seeeduino-XIAO-by-Nanase/

void setup() {
  pinMode(LED_BUILTIN, OUTPUT);
  pinMode(PIN_LED2, OUTPUT);
  pinMode(PIN_LED3, OUTPUT);
}

void loop() {

JeremySCook

#include <CapacitiveSensor.h>

/*
 * CapitiveSense Library Demo Sketch
 * Paul Badger 2008
 * Uses a high value resistor e.g. 10M between send pin and receive pin
 * Resistor effects sensitivity, experiment with values, 50K - 50M. Larger resistor values yield larger sensor values.
 * Receive pin is the sensor pin - try different amounts of foil/metal on this pin
 */

JeremySCook

#include <CapacitiveSensor.h>

/*
 * CapitiveSense Library Demo Sketch
 * Paul Badger 2008
 * Uses a high value resistor e.g. 10M between send pin and receive pin
 * Resistor effects sensitivity, experiment with values, 50K - 50M. Larger resistor values yield larger sensor values.
 * Receive pin is the sensor pin - try different amounts of foil/metal on this pin
 */

JeremySCook

#original code via: Neradoc https://github.com/Neradoc

import os
import socketpool
import wifi
import board
from digitalio import DigitalInOut, Direction, Pull

from adafruit_httpserver.server import HTTPServer
from adafruit_httpserver.response import HTTPResponse