JohnNeville

blueprint:
  name: Leak Checker and Notifier w/ Exclusions
  description: |2
    Checks all binary_sensors with the 'moisture' device_class for Wet Status.

    Devices/entities that are not assigned to an area, 
        or are assigned to areas where the name begins with an underscore (_), 
        or are explicitly excluded, will not be monitored.

    To monitor devices that are not fixed to a specific area, simply create a pseudo-area, such as "Roaming" or "Nowhere" and add the devices to that area.

JohnNeville

blueprint:
  name: Low ink level detection & notification for all IPP printers
  description: Regularly test all sensors with 'ink' marker_type for crossing
    a certain ink level threshold and if so execute an action.
  domain: automation
  input:
    threshold:
      name: Ink warning level threshold
      description: Ink sensors below threshold are assumed to be low-ink.
      default: 20

JohnNeville

# This is a fork of https://community.home-assistant.io/t/turn-a-fan-on-and-off-based-on-the-difference-between-a-humidity-sensor-and-a-baseline/255999

blueprint:
  name: Humidity Management (Fork)
  description: Turn a fan on and off based on the difference between a humidity sensor and a baseline
  domain: automation
  input:
    humidity_sensor:
        name: Humidity Sensor
        description: A sensor that measures the humidity of the area

JohnNeville

blueprint:
  name: Humidity Management based on abs. humidity (g/m3)
  description:
    Turn a fan on and off based on the difference between a humidity sensor
    and a baseline, based on absolute humidity
  domain: automation
  input:
    humidity_sensor:
      name: Humidity Sensor(Primary)
      description: A sensor that measures the humidity of the area to be vented, for example the shower

JohnNeville