Skip to content

Instantly share code, notes, and snippets.

View LynoDesu's full-sized avatar
🏠
Working from home

Adam Bandeira Lynas LynoDesu

🏠
Working from home
1 follower · 0 following
View GitHub Profile
@ernsheong
ernsheong / access-mac-localhost-from-parallels-desktop-ie-edge.md
Last active November 7, 2024 12:31
Accessing macOS localhost from Parallels Desktop IE or Edge

Access macOS localhost from IE or Edge within Parallels Desktop

This issue is so infuriating that I'm going to take some time to write about it.

  1. MOST IMPORTANT. Your local development server must be bound to IP address 0.0.0.0. Some do this by default, but many don't. You need to make sure that you run your local server with correct IP bindings. You may need to provide additional flags to your serve commands e.g. polymer serve --hostname domain.local, hugo serve --bind 0.0.0.0. If you use a named domain like domain.local, it has to be defined in /etc/hosts and pointing at 0.0.0.0.

  2. My Parallels setting is using Shared Network, nothing special there.

  3. Open macOS Terminal and type ifconfig. Look for the value under vnic0 > inet. It is typically 10.211.55.2.