Nako

version: '2'
services:
  wekandb:
    #-------------------------------------------------------------------------------------
    # ==== MONGODB FROM DOCKER HUB ====
    image: mongo:6
    #-------------------------------------------------------------------------------------
    container_name: wekan-db
    restart: always
    # command: mongod --oplogSize 128

Nako

#!/bin/bash
# https://gist.github.com/Nako/21d1a857fefae950d9afe8d9e4641af9
# very simple script to print block device - model - state - temperature
grep -l "drivetemp" /sys/class/hwmon/hwmon*/name | while read f;\
    do echo `ls ${f%/*}/device/block` - `smartctl -a /dev/\`ls ${f%/*}/device/block\`| grep -i "Family"` -  `smartctl -a /dev/\`ls ${f%/*}/device/block\`| grep -i "Serial"` - `cat ${f%/*}/device/model` - `cat ${f%/*}/device/state` - $((`cat ${f%/*}/temp1_input`/1000));
done

Nako

---
- name: Disable cloudinit networking configuration, install ifupdown, and create/generate /etc/network/interfaces file
  hosts: all
  gather_facts: true
  tasks:

    - name: disable cloudinit networking configuration /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg 
      ansible.builtin.copy:
        content: |
          network: {config: disabled}

Nako

; Easy Window Dragging -- KDE style (requires XP/2k/NT) -- by Jonny
; http://www.autohotkey.com
; This script makes it much easier to move or resize a window: 1) Hold down
; the ALT key and LEFT-click anywhere inside a window to drag it to a new
; location; 2) Hold down ALT and RIGHT-click-drag anywhere inside a window
; to easily resize it; 3) Press ALT twice, but before releasing it the second
; time, left-click to minimize the window under the mouse cursor, right-click
; to maximize it, or middle-click to close it.

; This script was inspired by and built on many like it

Nako

#!/usr/bin/env bash

### Bash Environment Setup
# http://redsymbol.net/articles/unofficial-bash-strict-mode/
# https://www.gnu.org/software/bash/manual/html_node/The-Set-Builtin.html
# set -o xtrace
set -o errexit
set -o errtrace
set -o nounset
set -o pipefail

Nako

Wordpress & Docker

This file will setup Wordpress, MySQL & PHPMyAdmin with a single command. Add the code below to a file called "docker-compose.yaml" and run the command

$ docker-compose up -d

# To Tear Down
$ docker-compose down --volumes

Nako

Client-side SSL

For excessively paranoid client authentication.

---

Updated Apr 5 2019:

because this is a gist from 2011 that people stumble into and maybe you should AES instead of 3DES in the year of our lord 2019.

some other notes:

Nako

#!/bin/sh
EMAILTO="[email protected]"
THRESHOLD=90 # if above $THRESHOLD is used -> send email notification to $EMAILTO

DFALL=$(df -h)
df -H | grep -vE '^Filesystem|tmpfs|cdrom' | awk '{ print $5 " " $1 }' | while read output;
do
  echo $output
  used=$(echo $output | awk '{ print $1}' | cut -d'%' -f1  )
  partition=$(echo $output | awk '{ print $2 }' )

Nako

I1112 09:22:13.318824   18806 initconfiguration.go:116] detected and using CRI socket: /var/run/dockershim.sock
I1112 09:22:13.318956   18806 interface.go:431] Looking for default routes with IPv4 addresses
I1112 09:22:13.318959   18806 interface.go:436] Default route transits interface "eth0"
I1112 09:22:13.319010   18806 interface.go:208] Interface eth0 is up
I1112 09:22:13.319027   18806 interface.go:256] Interface "eth0" has 1 addresses :[10.0.2.15/24].
I1112 09:22:13.319035   18806 interface.go:223] Checking addr  10.0.2.15/24.
I1112 09:22:13.319038   18806 interface.go:230] IP found 10.0.2.15
I1112 09:22:13.319041   18806 interface.go:262] Found valid IPv4 address 10.0.2.15 for interface "eth0".
I1112 09:22:13.319044   18806 interface.go:442] Found active IP 10.0.2.15

Nako

download

wget https://docs.broadcom.com/docs-and-downloads/raid-controllers/raid-controllers-common-files/8-07-14_MegaCLI.zip

unzip

unzip 8-07-14_MegaCLI.zip