| <Target Name="_SignAssemblies" AfterTargets="Compile" DependsOnTargets="CreateSatelliteAssemblies;$(RazorCompileDependsOn)" Condition="'$(CertificateThumbprint)' != ''"> | |
| <ItemGroup> | |
| <_AssembliesToSign Include="$(IntermediateOutputPath)$(TargetFileName)" /> | |
| <_AssembliesToSign Include="@(IntermediateSatelliteAssembliesWithTargetPath)" /> | |
| <_AssembliesToSign Include="@(RazorIntermediateAssembly)" /> | |
| </ItemGroup> | |
| <Message Importance="high" Text="Signing assemblies: @(_AssembliesToSign)" /> | |
| <SignFile SigningTarget="%(_AssembliesToSign.Identity)" CertificateThumbprint="$(CertificateThumbprint)" TimestampUrl="$(TimestampUrl)"/> | |
| </Target> |
Following the documentation at https://support.upsales.com/hc/en-us/articles/360001686068 isnt the easiest.
But there is no clear information on properties or examples how to use.
| #!/bin/sh -e | |
| # | |
| #Disable wwan | |
| #echo 1-1 | sudo tee /sys/bus/usb/drivers/usb/unbind | |
| uhubctl -l 1-1 -a 0 | |
| rmmod cdc_mbim | |
| rmmod cdc_wdm | |
| rmmod cdc_ncm |
| #!/bin/bash | |
| # Filter and route on hostname using SNI | |
| # https://github.com/Lochnair/xt_tls/issues/52 | |
| # This creates iptables rules and ip rules to filter and route HTTPS traffic based on hostname in SNI field | |
| # Some links on why packets might be droped, see rp_filter below | |
| # https://serverfault.com/questions/934848/ip-rule-to-works-but-ip-rule-fwmark-fails-why | |
| # https://serverfault.com/questions/932205/advanced-routing-with-firewall-marks-and-rp-filter | |
| # https://serverfault.com/questions/816393/disabling-rp-filter-on-one-interface |
| #!/bin/bash | |
| # Connect a Raspberry Pi to LTE using MC7700 Mini PCI Modem with adapter to USB-C | |
| sudo qmicli -d /dev/cdc-wdm0 -p --wds-stop-network | |
| sudo cat /sys/class/net/wwan0/qmi/raw_ip | |
| sudo ip link set dev wwan0 down | |
| # Enable OS Raw IP Mode setting (not persistent) | |
| sudo su -c "echo Y > /sys/class/net/wwan0/qmi/raw_ip" | |
| sudo qmicli -d /dev/cdc-wdm0 -p --device-open-net="net-raw-ip|net-no-qos-header" --wds-start-network="ip-type=6" --client-no-release-cid |
public interface IName
{
/// <summary>Default property override</summary>
[System.Runtime.CompilerServices.IndexerName("_Item")]
object this[string key] { get; }
}
public class ImplNameCs : IName
{
| ddns-update-style none; | |
| deny bootp; #default | |
| authoritative; | |
| include "/etc/dhcp/ipxe-option-space.conf"; | |
| # GREEN (private network) | |
| subnet 10.1.1.0 netmask 255.255.255.0 { | |
| range 10.1.1.100 10.1.1.199; | |
| option subnet-mask 255.255.255.0; |
| # Known working dnsmasq version 2.85 config for iPXE proxydhcp usage | |
| # things to replace: | |
| # * 10.1.1.0 - your subnet | |
| # * eth0 - interface to listen on, or switch to bind-dynamic | |
| # * 10.1.1.2 - your tftp server ip | |
| # * http://gentoo.ipxe.se/boot.ipxe - script to run once inside iPXE | |
| # Debug logging | |
| log-debug |
| # from https://wiki.archlinux.org/title/Full_system_backup_with_tar | |
| # -p, --acls and --xattrs store all permissions, ACLs and extended attributes. | |
| # Without both of these, many programs will stop working! | |
| # It is safe to remove the verbose (-v) flag. If you are using a | |
| # slow terminal, this can greatly speed up the backup process. | |
| #--exclude-from=$exclude_file | |
| tar --exclude=/tmp/* --exclude=/var/tmp/* --exclude=/usr/portage/* --acls --xattrs --one-file-system -cpvf - . | xz -zvv -T3 -0 > file.xz | |
| restore: | |
| xz | tar --acls --xattrs --numeric-owner -xpf - |
Coltech EMT707CTL From Clas Ohlson artid: 36-2897
Some discussions I don't understand in Finnish
To open this one up you need a 3 pointed "Nintendo" screwdriver