Palantir555

/*
   Based on the Matter On/Off Plug-in Unit / Outlet example
   Modified by JC for old mitsubishi electric HVAC unit using connector CN51
 */
#include <Matter.h>
#include <MatterOnOffPluginUnit.h>

MatterOnOffPluginUnit matter_outlet;

void handle_button_press();

Palantir555

/*
 * This sketch is the BLE GATT server for a halloween costume.
 * For more information on the project, check this post:
 *    https://jcjc-dev.com/2019/11/11/esp32-arduino-bluetooth-halloween-costume/
 *
 * Create a BLE server that, once we receive a connection, will poll a button and
 * an accelerometer. If the button is pressed or the device is moved abruptly,
 * the device will send a notification to the BLE clients.
 *
 * The service advertises itself as $BLE_STORM_SERVICE_UUID

Palantir555

/**
 * This sketch is the BLE GATT client for a halloween costume.
 * For more information on the project, check this post:
 *    https://jcjc-dev.com/2019/11/11/esp32-arduino-bluetooth-halloween-costume/
 *
 * Author: Juan Carlos Jimenez Caballero
 *
 * License: Fully Open Source. Use at your own peril
 * This firmware uses code found in Aruino's ESP32 BLE GATT example, and some
 * snippets from other unlicensed open source projects

Palantir555

"" Custom vim settings

"No need to be vi compatible.
:set nocompatible

"Searching
:set incsearch     "Turn on incremental searching
:set ignorecase    "Ignore case when searching
:set smartcase     "Ignore case when typing lowercase,
                   "otherwise match case

Palantir555

#include "mbed.h"
#include "USBMouse.h" //The library to work as a mouse

USBMouse mouse; //Declare the object mouse
DigitalIn myInput(p5); //Set an input to control when to send clicks

int main() {
    myInput.mode(PullDown); //Internal pull-down in the input pin
    while (1) { //Forever:
        if(myInput.read()==1) //If the input button/switch is enabled

Palantir555

export PYTHONPATH=/usr/local/lib/python2.7/site-packages:$PYTHONPATH

Palantir555

#####
# The path to use the PyQt module and others installed using homebrew
export PYTHONPATH=/usr/local/lib/python2.7/site-packages:$PYTHONPATH
#####

Palantir555

$ sudo nano ~/.bash_profile

Palantir555

$ brew install pyqt

Palantir555

#Code copied from: http://bit.ly/13yRYU4
#And later modified a bit.

from PyQt4 import QtGui
from PyQt4 import QtCore
from PyQt4.QtCore import pyqtSlot,SIGNAL,SLOT
import sys

class MyMainWindow(QtGui.QMainWindow):