Patrick Lang PatrickLang

Attempt 1

Installed http://dl.bintray.com/oneclick/rubyinstaller/rubyinstaller-2.3.1.exe

cd C:\Users\Patrick\Source\vagrant

Group No	Group Name	Name	Sub Name	Repeater Call Sign	Gateway Call Sign	Frequency	Dup	Offset	Mode	TONE	Repeater Tone	RPT1USE	Position	Latitude	Longitude	UTC Offset
4	Canada	Blenheim	Ontario	VA3IBA C	VA3IBA G	145.79	DUP-	0	DV	OFF	82.5Hz	Yes	Approximate	42.34	-81.98	-5:00
4	Canada	Toronto	Ontario	VA3MCU C	VA3MCU G	144.91	DUP-	0	DV	OFF	82.5Hz	Yes	Approximate	43.7	-79.39	-5:00
4	Canada	Mississauga	Ontario	VA3PMO B	VA3PMO G	444.25	DUP+	5	DV	OFF	82.5Hz	Yes	Approximate	43.59	-79.64	-5:00
4	Canada	Toronto	Ontario	VA3SLU B	VA3SLU G	442.4125	DUP+	5	DV	OFF	82.5Hz	Yes	Approximate	43.97	-79.43	-5:00
4	Canada	Sault Ste. Marie	Ontario	VA3SNR C	VA3SNR G	145.21	DUP-	0.6	DV	OFF	82.5Hz	Yes	Approximate	46.55	-84.32	-5:00
4	Canada	Sudbury	Ontario	VA3SRG C	VA3SRG G	147.09	DUP+	0.6	DV	OFF	82.5Hz	Yes	Approximate	46.5	-81	-5:00
4	Canada	Windsor	Ontario	VA3WDG B	VA3WDG G	445.825	DUP-	0	DV	OFF	82.5Hz	Yes	Approximate	42.25	-82.96	-5:00
4	Canada	Windsor	Ontario	VA3WDG C	VA3WDG G	145.61	DUP-	0	DV	OFF	82.5Hz	Yes	Approximate	42.25	-82.96	-5:

Get Convert-WindowsImage.ps1

Download it at https://gallery.technet.microsoft.com/scriptcenter/Convert-WindowsImageps1-0fe23a8f

Get the base Windows 10 image

Use the Windows Media Creation Tool to download an ISO. Only X64 is needed.

Get the latest cumulative update

Check Windows 10 Update History for the latest KB number. Then search the update catalog - example: http://www.catalog.update.microsoft.com/Search.aspx?q=3194798

From hashicorp/packer#2576 (comment)

cd ~/Source/go
$ENV:GOPATH=$(pwd)
go get github.com/mitchellh/packer
cd src\github.com\mitchellh\packer
git remote add hyperv https://github.com/patricklang/packer
git fetch hyperv HyperV
git checkout HyperV

Running this https://github.com/taliesins/packer-baseboxes/blob/master/hyperv-ubuntu-16.04.json

Generation 2 VM
Working boot commands
Passes preseed through HTTP

It works, all except for the last shutdown step. This is described at taliesins/packer-baseboxes#2, but the root cause isn't known yet.

packer.exe build -parallel=true hyperv-ubuntu-16.04.json

I started out with https://github.com/taliesins/packer-baseboxes/blob/master/hyperv-windows-10-amd64.json, but made minor changes:

commented out three lines - they take a long time to run and I'm not sure they actually save disk space

-       "./windows/common/ultradefrag.ps1",
-      "./windows/common/optimize-drive.ps1",
-      "./windows/common/sdelete.ps1"

I ran it with packer.exe build hyperv-windows-10-amd64.json, which worked fine. It's slower than I would like due to the cleanup.ps1 runtime

packer.exe build -only=hyperv-iso windows_2016_docker.json

hyperv-iso output will be in this color.

Warnings for build 'hyperv-iso':

* For nested virtualization, when virtualization extension is enabled, mac spoofing should be allowed.

Steps tried

Installed Debian 8.7.1 from ISO using Packer with hyperv-iso plugin. source

packer build -only=hyperv-iso -var-file=.\debian8.json .\debian.json

Added deb http://http.debian.net/debian jessie-backports main to /etc/apt/sources.list
sudo apt-get install hyperv-daemons=4.*
sudo apt-get install linux-image-amd64=4.8* linux-base=4.3*
sudo reboot

Create a resource group

Create a resource group in Azure to hold all of the resources you'll be creating:

Virtual Network
Virtual Machines

Create a VNet

Don't use 172.* IPs. I used 10.3.0.0/24

hAP AC lite

This is currently passing traffic through either wireless interface and appears to be favoring wlan2 (5ghz). I can get up to 98.4Mbps from a LAN port through the NAT to another node on my network with file copies.

This has two wireless interfaces and 5 ethernet ports. Ether1 and both wlan are used for "internet". The others are bridged on LAN side since there isn't an internal switch.

# mar/12/2017 23:27:35 by RouterOS 6.36.4
`#
/interface bridge