Pavel Sayekat Pavel-Sayekat

Client-side SSL

For excessively paranoid client authentication.

Updated Apr 5 2019:

because this is a gist from 2011 that people stumble into and maybe you should AES instead of 3DES in the year of our lord 2019.

some other notes:

Sample service script for debianoids

Look at LSB init scripts for more information.

Usage

Copy to /etc/init.d:

# replace "$YOUR_SERVICE_NAME" with your service's name (whenever it's not enough obvious)

Install dep, and start tracker

sudo apt-get install bittornado ctorrent
bttrack --port 6969 --dfile ~/.bttrack/dstate --logfile ~/.bttrack/tracker.log --nat_check 0 --scrape_allowed full

Now, create a torrent file

ctorrent -t -u "YOUR_SERVER_IP:6969/announce" -s new_file_name.torrent file_or_folder_for_torrent

On Mac OS (host):

Shutdown your VM and do:

VirtualBox > Settings > Network > Add (you will get vboxnet0)

On a terminal ifconfig will show you new interface vboxnet0

VM's Settings > System > check "Enable I/O APIC." VM's Settings > Network > Adapter 2 > host-only vboxnet0

lsusb lists the fingerprint reader in the x240 as follows:

Bus 002 Device 003: ID 138a:0017 Validity Sensors, Inc.

There exists experimental driver support for this in a fork of libfprint for vfs5011 sensors, however you'll need to compile the driver yourself. To get the fingerprint sensor to work for lightdm login, su etc, follow these steps.

Install fingerprint-gui:

sudo add-apt-repository ppa:fingerprint/fingerprint-gui

	#!/usr/bin/env python3

	# ircecho.py
	# Copyright (C) 2011 : Robert L Szkutak II - http://robertszkutak.com
	#
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 3 of the License, or
	# (at your option) any later version.
	#

	sudo aptitude install libarchive-dev bsdtar

	git clone git://projects.archlinux.org/pacman.git

	cd pacman
	./autogen.sh
	./configure --disable-doc
	make
	sudo make install

	/*
	weather_station_logger_xxxx13.ino
	Jay Ham
	Colorado State University
	[email protected]

	Weather station data logger Program
	Reads and logs all primary weather variables, including:
	Air Temperature, Humidity, Wind Speed, Wind Direction, Global Irriadiance, and Precipitation.
	Samples sensors every 5 s and stores 5 min statistics on sd card

	// ImageMagick - Convert SVG to PNG w/ transparency
	//
	// - open terminal
	//
	// - confirm you have imagemagick installed
	// --- type: convert -v
	//
	// - cd to folder
	//
	// - single file

	# to generate your dhparam.pem file, run in the terminal
	openssl dhparam -out /etc/nginx/ssl/dhparam.pem 2048