Anucha Mai. Peelz

Jenkins REST scripts

Set variable

export JENKINS_URL=

export COOKIES=

Get the config.xml from a pre-created job or create another one according to the need :

Create a Wi-Fi hotspot on Linux using `nmcli`

Original post : https://unix.stackexchange.com/a/310699

nmcli con add type wifi ifname wlan0 con-name Hostspot autoconnect yes ssid Hostspot
nmcli con modify Hostspot 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared
nmcli con modify Hostspot wifi-sec.key-mgmt wpa-psk
nmcli con modify Hostspot wifi-sec.psk "veryveryhardpassword1234"

These are my own personal notes on how i setup a Pi Zero W as an access points it is a blatant copy of this: https://gist.github.com/tcg/0c1d32770fcf6a0acf448b7358c5d059 but is just missing a couple of things from: http://imti.co/post/145442415333/raspberry-pi-3-wifi-station-ap and like tcg, this is not intended as a guide but notes as i will invariably have to rebuild this sometime and i have broken biscuits for brains.

1. making the pi zero accesible from a computer

this is really just the same info as here https://gist.github.com/gbaman/975e2db164b3ca2b51ae11e45e8fd40a

flash raspbian lite to sd card
unplug and replug sd card adapter if necessary to see 'boot' drive
edit cmdline.txt add: modules-load=dwc2,g_ether after the word rootwait
edit config.txt and add dtoverlay=dwc2 to the end of the file
create a blank file called ssh

Create Root CA (Done once)

Create Root Key

Attention: this is the key used to sign the certificate requests, anyone holding this can sign certificates on your behalf. So keep it in a safe place!

openssl genrsa -des3 -out rootCA.key 4096

	#!/bin/sh
	parse_yaml() {
	local prefix=$2
	local s='[[:space:]]' w='[a-zA-Z0-9_]' fs=$(echo @\|tr @ '\034')
	sed -ne "s\|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$\|\1$fs\2$fs\3\|p" \
	-e "s\|^\($s\)\($w\)$s:$s\(.*\)$s\$\|\1$fs\2$fs\3\|p" $1 \|
	awk -F$fs '{
	indent = length($1)/2;
	vname[indent] = $2;
	for (i in vname) {if (i > indent) {delete vname[i]}}