Abban

<?php

function themename_customize_register($wp_customize){
    
    $wp_customize->add_section('themename_color_scheme', array(
        'title'    => __('Color Scheme', 'themename'),
        'priority' => 120,
    ));

    //  =============================

ChickenProp

After installing Arch on my Raspberry Pi, internet worked out of the box: I could plug it into the router, turn it on, ssh in and start downloading things. But the router is in my housemate's bedroom, which isn't ideal. If I want the Pi to be connected to the internet in my room, I need it to be connected to my laptop. (Another option would be a USB wifi dongle, of course.) This is how I did it. Much credit goes to the Ubuntu wiki's Connection sharing page.

I should disclaim that I don't fully understand networking stuff, and some of what I say might be wrong. I also didn't write this as I was going; so while I've consulted my browser and shell histories, it's possible I've forgotten some steps.

My laptop is running Gentoo, and this is where most of the work has to be done. It connects to the internet through wifi, on interface wlan0. The ethernet port is eth0, and eth0 is also the name of the ethernet port on the Pi.

Step zero: plug ev

Chaser324

Whether you're trying to give back to the open source community or collaborating on your own projects, knowing how to properly fork and generate pull requests is essential. Unfortunately, it's quite easy to make mistakes or not know what you should do when you're initially learning the process. I know that I certainly had considerable initial trouble with it, and I found a lot of the information on GitHub and around the internet to be rather piecemeal and incomplete - part of the process described here, another there, common hangups in a different place, and so on.

In an attempt to coallate this information for myself and others, this short tutorial is what I've found to be fairly standard procedure for creating a fork, doing your work, issuing a pull request, and merging that pull request back into the original project.

Creating a Fork

Just head over to the GitHub page and click the "Fork" button. It's just that simple. Once you've done that, you can use your favorite git client to clone your repo or j

Davidnet

#!/bin/bash

# Copyright (c) 2011-2018, NVIDIA CORPORATION.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#  * Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#  * Redistributions in binary form must reproduce the above copyright

wvanderdeijl

// This example is part of a [larger serie of posts](https://gist.github.com/wvanderdeijl/734cc05dd2438a9946c396d714d5e83e) with
// examples of federation between different cloud environments.

import { AssumeRoleCommand, STSClient } from '@aws-sdk/client-sts';
import { Resource } from '@google-cloud/resource-manager';
import { GoogleAuth, GoogleAuthOptions } from 'google-auth-library';

const AWS_REGION = 'eu-west-1';
const AWS_ROLE_ARN = 'arn:aws:iam::999999999999:role/my-federated-role';
const GCP_PROJECT_ID = 'my-google-project';