Skip to content

Instantly share code, notes, and snippets.

View SunboX's full-sized avatar

André Fiedler SunboX

107 followers · 39 following
View GitHub Profile
@kevinhooke
kevinhooke / gist:d2eabbd402741ae728ef6ab2985dfddd
Last active January 31, 2020 23:37
Using Docker on Windows with Cisco AnyConnect VPN in non-split tunnel mode
Start docker before connecting vpn (to get local ip, eg 192.168.99.100)
After start, connect to VPN, then follow next steps:
From: https://github.com/boot2docker/boot2docker/issues/628
Add port forwarding to the NAT'd adapter in VirtualBox, add:
docker: host=127.0.0.1 port=2367 guest ip=[blank] guest port=2376
container port: 127.0.0.1, port=[the container exposed port to forward] guest ip=[blank], guest port[container port]
From https://www.iancollington.com/docker-and-cisco-anyconnect-vpn/
In Docker Quickstart Terminal, to point to port forwarded Docker, and to turn off checking of SSL certs:
@manuelbl
manuelbl / README.md
Created August 3, 2019 09:12
ESP32 as Bluetooth Keyboard

ESP32 as Bluetooth Keyboard

With its built-in Bluetooth capabilities, the ESP32 can act as a Bluetooth keyboard. The below code is a minimal example of how to achieve it. It will generate the key strokes for a message whenever a button attached to the ESP32 is pressed.

For the example setup, a momentary button should be connected to pin 2 and to ground. Pin 2 will be configured as an input with pull-up.

In order to receive the message, add the ESP32 as a Bluetooth keyboard of your computer or mobile phone:

  1. Go to your computers/phones settings
  2. Ensure Bluetooth is turned on