VeggieVampire

import pygame
import json
import subprocess
import os

def run_script(button):
    os.system("pkill rtl_fm")
    command = "rtl_fm -A lut -E deemp -f {} -M {} -s {} -r {} - | ffmpeg -nostats -loglevel quiet -r 200k -f s16le -ar {} -ac 1 -i - -f wav - | aplay -q -t wav > /dev/null 2>&1".format(
        button["frequency"], button["modulation_mode"], button["sample_rate"], button["output_rate"], button["output_rate"])
    subprocess.Popen(command, shell=True, 

VeggieVampire

import subprocess
import os
import time
import sys

os.system("pkill rtl_fm")
FM_frequency = "103.3e6" #desired FM station
#FM_frequency = sys.argv[1] + "e6"
modulation_mode = "wbfm" #wideband FM
sample_rate = "200000" #lowpass/resample

VeggieVampire

import rtlsdr
import numpy as np
from scipy import signal

# Connect to the SDR and configure it
sdr = rtlsdr.RtlSdr()
sdr.sample_rate = 2.4e6  # 2.4 MHz sample rate
sdr.gain = 'auto'

# Define the frequency ranges to scan

VeggieVampire

import rtlsdr
import pygame
import time

# Create an instance of the RtlSdr class
sdr = rtlsdr.RtlSdr()

# Set the center frequency of the RTL-SDR device (in Hz)
sdr.center_freq = 101.1e6

VeggieVampire

using System.Collections;
using System.Collections.Generic;
using UnityEngine;

public class FlickeringLightScript : MonoBehaviour {

	Light testLight;

	public float minFlickerTime = 0.1f;
	public float maxFlickerTime = 0.04f;

VeggieVampire

using System.Collections;
using System.Collections.Generic;
using UnityEngine;

public class SpotlightController : MonoBehaviour {
	
	private Vector3 targetPos;
	public float moveSpeed = 10f;
	public GameObject followTarget;
	public float Xoffset = 0f;

VeggieVampire

#!/usr/bin/expect -f
#set multiPrompt {[#>$] }
#exp_internal 1
set NODE [lindex $argv 0];
set IPz [lindex $argv 1];
set Portz [lindex $argv 2];
set Passwdz [lindex $argv 3];
#log_file -noappend output.log
set timeout 1
set force_conservative 0  ;# set to 1 to force conservative mode even if

VeggieVampire

// the setup function runs once when you press reset or power the board
int led6 = 6; 
int buzzer = 7;

int val = 0; //value for storing moisture value 
int soilPin = A4;//Declare a variable for the soil moisture sensor 
int soilPower = 2;//Variable for Soil moisture Power

VeggieVampire

/*
  Morse Code Project
  
  This code will loop through a string of characters and convert these to morse code. But first you have to get the password to start the morse code seation.
  It will blink two LED lights and play audio on a speaker. 
  https://www.instructables.com/id/Arduino-Morse-Code/ 
 */
 
 
//**************************************************//

VeggieVampire

Basic Perfect Makefile for compiling target .cpp files with SDL2 libraries using g++.
#USEAGE: copy Makefile to folder with .cpp files then type "make"


#OBJS specifies which files to compile as part of the project
OBJS = $(wildcard *.cpp)

#CC specifies which compiler we're using
CC = g++