aep

*libgcc:
libgcc.a%s

*startfile:
rcrt1.o%s

*link:
-no-dynamic-linker

aep

ld \
-o exe \
rcrt1.o \
crti.o \
bla-00a457c78cdaf6f1.bla0.rust-cgu.o \
bla-00a457c78cdaf6f1.bla1.rust-cgu.o \
bla-00a457c78cdaf6f1.crate.allocator.rust-cgu.o \
--gc-sections -z relro -z now -Bstatic \
libstd-827ddea93328ae2d.rlib \

aep

   0x0000555555598258 <+0>:	push   %rbp
   0x0000555555598259 <+1>:	mov    %rsp,%rbp
   0x000055555559825c <+4>:	push   %r14
   0x000055555559825e <+6>:	push   %rbx
   0x000055555559825f <+7>:	sub    $0x90,%rsp
   0x0000555555598266 <+14>:	movdqu (%rdi),%xmm0
   0x000055555559826a <+18>:	movdqa %xmm0,-0xa0(%rbp)
   0x0000555555598272 <+26>:	mov    %rsi,-0x48(%rbp)
   0x0000555555598276 <+30>:	lea    0x230c93(%rip),%rdi        # 0x5555557c8f10 <_ZN3std10sys_common11thread_info11THREAD_INFO7__getit5__KEY17hffb73c8d664d75eeE__TLS_GOT>
   0x000055555559827d <+37>:	callq  0x5555555a9fb8 <__tls_get_new>

aep

Hornet USB booting...                                      
VID=0xcf3,PID=0x9330
iManufacturer=0x10,iProduct=0x20,iSerialNumber=0x30
bMaxPower=0xfa
-> COLD_START
bUSBPhyBias=0x3
RUN

aep

00000FF8   FF FF FF FF  FF FF FF FF  02 02 00 03  7F BE F1 88  00 00 00 00  00 00 00 00  00 00 00 00  ............................
00001014   00 00 00 00  00 00 00 00  00 00 1F 00  11 02 00 00  00 00 04 00  5B 00 7D 00  03 00 08 FF  ....................[.}.....
00001030   11 00 00 00  00 10 01 00  00 22 22 02  00 50 01 50  01 50 01 00  00 00 00 00  00 28 00 A4  .........""..P.P.P.......(..
0000104C   00 00 00 00  FF 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  0E 0E 03 00  2C E2 00 02  ........................,...
00001068   0E 1C E0 00  00 08 E0 00  00 08 00 00  00 00 00 00  00 00 00 00  09 00 00 00  00 00 00 00  ............................
00001084   00 00 00 00  00 00 70 89  A2 EF 00 8D  00 00 00 ED  00 8F 00 00  00 EA 00 8F  00 00 00 00  ......p.....................
000010A0   00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ............................
000010BC   00 00 00 00  00 00 00 70  AC 70 89 AC  70 89 AC 7A  89 A2 20 20  20 20 20 20  20 20 20 1E  .....

aep

[    0.000000] Linux version 4.4.110 (aep@stark) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3812+1-987a7e3175) ) #0 Wed Jan 17 12:22:43 2018
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]

aep

make[1]: Leaving directory '/home/aep/Downloads/SmartPlug_GPL/boot/u-boot/lib_generic'
make -C `dirname common/libcommon.a`
make[1]: Entering directory '/home/aep/Downloads/SmartPlug_GPL/boot/u-boot/common'
mips-openwrt-linux-gcc  -Os   -D__KERNEL__ -DTEXT_BASE=0x9f000000 -I/home/aep/Downloads/SmartPlug_GPL/boot/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /home/aep/proj/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/lib/gcc/mips-openwrt-linux-musl/5.4.0/include -pipe  -DCONFIG_MIPS -D__MIPS__  -mabicalls -march=mips32r2 -Wall -Wstrict-prototypes   -g -c -o main.o main.c
mips-openwrt-linux-gcc  -Os   -D__KERNEL__ -DTEXT_BASE=0x9f000000 -I/home/aep/Downloads/SmartPlug_GPL/boot/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /home/aep/proj/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/lib/gcc/mips-openwrt-linux-musl/5.4.0/include -pipe  -DCONFIG_MIPS -D__MIPS__  -mabicalls -march=mips32r2 -Wall -Wstrict-prototypes   -g -c -o ACEX1K.o ACEX1K.c
mips-openwrt-

aep

Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : If you need SWD support, flash KT-Link buffer from https://github.com/bharrisau/busblaster
and use dp_busblaster_kt-link.cfg instead
adapter speed: 1000 kHz
jtag
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100

aep

aep@derp: ~/kram openocd -f  openocd.conf -f target/ar71xx.cfg
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : If you need SWD support, flash KT-Link buffer from https://github.com/bharrisau/busblaster
and use dp_busblaster_kt-link.cfg instead
adapter speed: 1000 kHz
jtag
adapter_nsrst_delay: 100

aep

int nm_lib_parseU32(NM_UINT32 *val, const char *arg)
{
    unsigned long res;
    char *ptr = NULL;

    if (!arg || !*arg)
    {
        return -1;
    }