Alessandro Del Prete alexdelprete

The Raspberry Pi foundation have now released a beta version of an official 64-bit Kernel which can be installed using the rpi-update script. The rpi-update script can be found at https://github.com/Hexxeh/rpi-update/blob/master/rpi-update or through the Raspbian repositories

Introduction

The objective of these instructions is to build a stock 64bit Linux Kernel for use on the Raspberry Pi 4B on a Debian x64 machine (Windows Subsystem for Linux in my case), and deploy on the Raspberry Pi.

Notes:

Transfer to Pi is using my NAS in this example, replace with shared drive/memory stick etc. as required.
- (N: drive on Windows and /mnt/NAS on Linux in this example).
For a specific Kernel version replace the 4.19 with the wanted version in the git clone command.
Greater than 3GB RAM only currently available on Kernel 4.19

Latest Update 2021-03-06 : New image showing the new "Services" in Home Assistant and got some tips from the comments below.

Credits and thanks: Home Assistant Forum users & Github users: @ocso, @wiphye, @teachingbirds, @tboyce1, @simbesh, @JeffLIrion @ff12 @rebmemer @siaox @DiederikvandenB @Thebuz @clapbr @Finsterclown

Start apps on your android device (in the examples below, my Nvidia Shield TV) from Home Assistant

Starts Youtube App

entity_id: media_player.shield
command: >-

	// This configuration is not mine but found on a german forum, and modified for my needs. I'm sharing because all info are in german
	// Comment about a more secure VPN cfg are welcome, this is mere cut and past because testing is slow
	//
	// On the OPNSense side, configure the IPSEC tunnel in this way
	// Tunnel Setting:
	//
	// - Connection method: I've put "Respond only" because the OPNSense is installed on stable server
	// - Key Exchange version: V1
	// - Internet Protocol: IPv4
	// - Interface: WAN

	#! /bin/bash

	# NEWLY ADDED BACKUP FUNCTIONALITY IS NOT FULLY TESTED YET, USE WITH CARE, ESPECIALLY DELETION
	# Developed for DSM 6 - 7.0.1. Not tested on other versions.
	# Steps to install
	# Save this script in one of your shares
	# Edit it according to your requirements
	# Backup /usr/syno/share/nginx/ as follows:
	# # cd /usr/syno/share/
	# # tar cvf ~/nginx.tar nginx

	###
	# Proxmox or other server kernel params cheap tune and secure.
	# Try it if you have heavy load on server - network or memory / disk.
	# No harm assumed but keep your eyes open.
	#
	# @updated: 2020-02-06 - more params used, adjust some params values, more comments on params
	#

	### NETWORK ###