Albert Koczy alufers

Sync

rsync.net

$0.015 per GB/m (at least 680 GB), $0.01 per GB/m for more than 100 TB, $0.006 per GB/m for more than 1 PB.
git-annex discount: at least 100GB, paid annually)
attic/borg discount: at least 100 GB, paid annually)
Remote SSH commands (checksum, mv, cp, rm, tree, dd, etc.) supported
git

People

`:bowtie:`	😄 `:smile:`	😆 `:laughing:`
😊 `:blush:`	😃 `:smiley:`	☺️ `:relaxed:`
😏 `:smirk:`	😍 `:heart_eyes:`	😘 `:kissing_heart:`
😚 `:kissing_closed_eyes:`	😳 `:flushed:`	😌 `:relieved:`
😆 `:satisfied:`	😁 `:grin:`	😉 `:wink:`
😜 `:stuck_out_tongue_winking_eye:`	😝 `:stuck_out_tongue_closed_eyes:`	😀 `:grinning:`
😗 `:kissing:`	😙 `:kissing_smiling_eyes:`	😛 `:stuck_out_tongue:`

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

radare2

load without any analysis (file header at offset 0x0): r2 -n /path/to/file

analyze all: aa
show sections: iS
list functions: afl
list imports: ii
list entrypoints: ie
seek to function: s sym.main

	This is gist.
	There are many like it, but this one is mine.
	It is my life.
	I must master it as I must master my life.
	Without me gist is useless.
	Without gist, I am useless.

	/*
	In the node.js intro tutorial (http://nodejs.org/), they show a basic tcp
	server, but for some reason omit a client connecting to it. I added an
	example at the bottom.

	Save the following server in example.js:
	*/

	var net = require('net');

	// A small SSH daemon providing bash sessions
	//
	// Server:
	// cd my/new/dir/
	// #generate server keypair
	// ssh-keygen -t rsa
	// go get -v .
	// go run sshd.go
	//
	// Client:

	var gulp = require('gulp');
	var less = require('gulp-less');

	gulp.task('less', function() {
	return gulp.src('./style.less') // only compile the entry file
	.pipe(less())
	.pipe(gulp.dest('./build'))
	});
	gulp.task('watch', function() {
	gulp.watch('./*.less', ['less']); // Watch all the .less files, then run the less task


	/*
	##Device = Desktops
	##Screen = 1281px to higher resolution desktops
	*/

	@media (min-width: 1281px) {

	/* CSS */

	{
	"presets": ["es2015"],
	"plugins": ["transform-async-to-generator"]
	}