Anthony Rabbito anthr76

First and foremost the manual mentions it explicitly:

[Use] the standalone home-manager tool. For platforms other than NixOS (...), this is the only available choice. (...) See Section 1.1, “Standalone installation” for instructions (...)

https://grahamc.com/blog/erase-your-darlings
https://github.com/ryantm/home-manager-template
ico nix-store sqlite corruption NixOS/nix#1353
ico nix-store permission error NixOS/nix#4356
https://rgoswami.me/posts/local-nix-no-root/
https://dram.page/p/bootstrapping-nix/

Pre-requisites

Install IPMItools using your package manager on laptop and target machine. Load the drivers on the target.

modprobe ipmi_devintf
modprobe ipmi_si

If you see the following, drivers are not loaded.

You might want to read this to get an introduction to armel vs armhf.

If the below is too much, you can try Ubuntu-ARMv7-Qemu but note it contains non-free blobs.

Running ARM programs under linux (without starting QEMU VM!)

First, cross-compile user programs with GCC-ARM toolchain. Then install qemu-arm-static so that you can run ARM executables directly on linux

If there's no qemu-arm-static in the package list, install qemu-user-static instead

Latest Update 2021-03-06 : New image showing the new "Services" in Home Assistant and got some tips from the comments below.

Credits and thanks: Home Assistant Forum users & Github users: @ocso, @wiphye, @teachingbirds, @tboyce1, @simbesh, @JeffLIrion @ff12 @rebmemer @siaox @DiederikvandenB @Thebuz @clapbr @Finsterclown

Start apps on your android device (in the examples below, my Nvidia Shield TV) from Home Assistant

Starts Youtube App

entity_id: media_player.shield
command: >-

	version: '3'
	services:
	traefik:
	restart: unless-stopped
	image: traefik:v2.0.2
	ports:
	- "80:80"
	- "443:443"
	labels:
	- "traefik.http.services.traefik.loadbalancer.server.port=8080"

	"""
	Lambda Func to update slack usergroup based on pagerduty rotation
	From: https://gist.github.com/devdazed/473ab227c323fb01838f


	NOTE: If you get a permission denied while setting the usergroup it is because there’s a workspace preference in slack
	that limits who can manage user groups. At the time of writing it was restricted to owners and admins so i had to get
	an owner to install the app. First i added them as a collaborator and then had them re-install the app, and got the new
	auth token and added that to param store.

	# https://docs.ansible.com/ansible/latest/modules/dconf_module.html
	#
	# To determine what dconf keys and values to use, you can run `dconf watch /`
	# in a terminal as you make changes in settings or tweaks. You can also use
	# `dconf read <key>` and `dconf write <key> <value>` to experiment with various
	# settings. The dconf-editor application is also useful for exploring various
	# keys along with their descriptions.

	- hosts: localhost
	tasks:

	#Spin up Kubernetes control plane as part of before_script, and destroys it using after_script
	#Some custom logic to get to the right ip address
	#Requres the gitlab docker runner, with "pass-thru" to the host docker socket.

	stages:
	- test
	image: python:3.6.6 #the docker image you run in needs Docker installed, and access to the host docker socket.

	test_integration_k8s:
	tags:

	<?xml version="1.0"?>
	<!DOCTYPE profile>
	<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns">
	<add-on>
	<add_on_products config:type="list"/>
	</add-on>
	<bootloader>
	<global>
	<append>resume=/dev/disk/by-uuid/ba6011fb-7d2a-45d9-acf9-4ffee031f253 splash=silent quiet showopts</append>
	<gfxmode>auto</gfxmode>

	#!/bin/bash

	# This script will install AMDGPU-PRO OpenCL and Vulkan support.
	#
	# For Ubuntu and it's flavor, just install the package using this command
	# in extracted driver directory instread.
	#
	# ./amdgpu-pro-install --opencl=legacy,pal --headless --no-dkms
	#
	# For Arch Linux or Manjaro, use the opencl-amd or rocm-opencl-runtime on AUR instread.