aont aont

People

`:bowtie:`	😄 `:smile:`	😆 `:laughing:`
😊 `:blush:`	😃 `:smiley:`	☺️ `:relaxed:`
😏 `:smirk:`	😍 `:heart_eyes:`	😘 `:kissing_heart:`
😚 `:kissing_closed_eyes:`	😳 `:flushed:`	😌 `:relieved:`
😆 `:satisfied:`	😁 `:grin:`	😉 `:wink:`
😜 `:stuck_out_tongue_winking_eye:`	😝 `:stuck_out_tongue_closed_eyes:`	😀 `:grinning:`
😗 `:kissing:`	😙 `:kissing_smiling_eyes:`	😛 `:stuck_out_tongue:`


Summary	How to control (or Understand) your GIST page's files list order.
Notice	not official documentation.

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

	#!/usr/bin/env python3

	import sys
	import fontforge

	def main(file):
	for font in fontforge.fontsInFile(file):
	f = fontforge.open(u'%s(%s)' % (file, font))
	f.generate('%s.ttf' % font)

	# -- coding: utf-8 --
	#test on python 3.4 ,python of lower version has different module organization.
	import http.server
	from http.server import HTTPServer, BaseHTTPRequestHandler
	import socketserver

	PORT = 8080

	Handler = http.server.SimpleHTTPRequestHandler

	#!/usr/bin/python
	import fcntl
	import os
	import struct
	import array
	import sys

	BLKGETSIZE=0x1260
	BLKGETSIZE64=0x80081272
	BLKSSZGET=0x1268

	<?xml version="1.0" encoding="UTF-8"?>
	<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
	<plist version="1.0">
	<dict>
	<key>PayloadContent</key>
	<array>
	<dict>
	<key>IKEv2</key>
	<dict>
	<key>AuthName</key>

	socat Examples
	===============

	* 注意
	- SYSTEM で : を使う時は必ずエスケープすること

	* 相手に接続

	# telnet, netcat, socat それぞれの場合
	$ socat - TCP:127.0.0.1:8000

	23.21.150.121:3478
	iphone-stun.strato-iphone.de:3478
	numb.viagenie.ca:3478
	s1.taraba.net:3478
	s2.taraba.net:3478
	stun.12connect.com:3478
	stun.12voip.com:3478
	stun.1und1.de:3478
	stun.2talk.co.nz:3478
	stun.2talk.com:3478