apla

1. Select menu item Network > Switch and click Add button under VLAN ID section
2. For the new VLAN, make sure the CPU is tagged, then select untagged for the LAN port(s) you are want to use this new VLAN. Make sure that port is off for all other VLANs. Click Save & Apply
3. In the Network > Interfaces click Add new interface button (under the interface overview section)
4. Name the new interface (Guest), select the new VLAN (likely something like eth0.3); the rest of the defaults are okay. Click Submit.
5. Set your desired IPv4 address (for the router on this VLAN), net mask, and gateway, and any other stuff here you want. Click Save.
6. Click Setup DHCP Server button. Defaults here are fine, but you can change them if you want. Click Save.
7. Select the Firewall Settings tab for the interface. The radio button will default to the unspecified -or- create box. Name your firewall zone (guest). Click Save & Apply.
8. Network > Firewall > Zones section,

apla

avr-uart-calc

A Pen by ivan baktsheev on CodePen.

License.

apla

#!/bin/bash

cmd=$1
pin=$2
mode=$3
value=$3


pin_num=

apla

## curl http://127.0.0.1:9100/metrics
# HELP go_gc_duration_seconds A summary of the GC invocation durations.
# TYPE go_gc_duration_seconds summary
go_gc_duration_seconds{quantile="0"} 0
go_gc_duration_seconds{quantile="0.25"} 0
go_gc_duration_seconds{quantile="0.5"} 0
go_gc_duration_seconds{quantile="0.75"} 0
go_gc_duration_seconds{quantile="1"} 0
go_gc_duration_seconds_sum 0
go_gc_duration_seconds_count 0

apla

ls -la /usr/local/
total 8200
drwxr-xr-x   15 root  wheel      480 Jan 23 16:47 .
drwxr-xr-x@  11 root  wheel      352 Jul 11 00:54 ..
-rw-r--r--    1 user  wheel        0 Jul 22 03:20 .com.apple.installer.keep
drwx------   72 user  staff     2304 Jul 22 03:55 Cellar
drwxr-xr-x    4 user  admin      128 Mar  7 23:25 Frameworks
drwxrwxr-x   17 user  admin      544 Jul 19 09:15 Homebrew
drwxrwxr-x  466 user  admin    14912 Jul 22 03:55 bin
-rw-r--r--    1 root  wheel  3970951 Apr 15 08:49 createnetwork.log

apla

#!/bin/bash

# parted --list
sudo lsblk -o name,mountpoint,parttype,partlabel,label,size,uuid

DISKS=( $(lsblk --nodeps -n -o name) )

read -e -p "Source disk: " -i "sda" FROM
read -e -p "Destination disk: " -i "sdb" TO

apla

ls -1 ~/Library/Mail/V5 | xargs -I {} sqlite3 -noheader -column ~/Library/Accounts/Accounts4.sqlite "select ZIDENTIFIER || ' => ' || ZUSERNAME || '/' || ZACCOUNTDESCRIPTION || ' ACTIVE: ' || ZACTIVE from ZACCOUNT where  ZIDENTIFIER = '{}'"

apla

Preview:

1. Copy jscad file contents to the OpenJSCad.org

Prepare and edit:

1. Download and install Atom editor
2. Launch Atom, then go to the plugins, search and install atom-jscad package
3. Save all the files from this gist to the folder on your computer
4. Open folder with Atom editor

apla

.shadergraph-graph {
  font: 12px sans-serif;
  line-height: 25px;
  position: relative;
}
.shadergraph-graph:after {
  content: ' ';
  display: block;
  height: 0;
  font-size: 0;

apla

@echo off
REM instructions from: https://groups.google.com/d/msg/cefsharp/BJLMXl9c204/HMJlp8mZzF0J
REM seems like partial instructions copied to SO: http://stackoverflow.com/questions/8033495/chromium-embedded-framework-mp3-support
REM all chromium releases: https://bitbucket.org/chromiumembedded/cef/wiki/BranchesAndBuilding.md#markdown-header-release-branches
REM 2272 - latest chromium with npapi (41)
REM there is a commits list: https://bitbucket.org/chromiumembedded/cef/branch/2272
REM https://github.com/cefsharp/CefSharp
REM cef builds http://www.magpcss.net/cef_downloads/
REM https://cefbuilds.com