karelbilek

Moving to gemini

gemini://karelbilek.com/btcinputs

dexX7

The following example demonstrates the creation of a raw Omni transaction, which transfers 0.1 Test Omni with token identifier 2 from 1K6JtSvrHtyFmxdtGZyZEF7ydytTGqasNc to 1Njbpr7EkLA1R8ag8bjRN7oks7nv5wUn3o, with a transaction fee of 0.0006 BTC. For the sake of a demonstration, more than one unspent output was consumed.

1) List unspent outputs

List unspent outputs for 1K6JtSvrHtyFmxdtGZyZEF7ydytTGqasNc.

omnicore-cli "listunspent" 0 999999 '["1K6JtSvrHtyFmxdtGZyZEF7ydytTGqasNc"]'

chris-belcher

list of links for quick copypasting when debating on forums, also useful as a reading list

this was posted on reddit, link is https://www.reddit.com/r/Bitcoin/comments/7mh8c2/long_live_decentralized_bitcoin_a_reading_list/

some of these links may be subject to linkrot, try looking on archive.org or archive.is

Summary / The fundamental tradeoff

a trip to the moon requires a rocket with multiple stages by gmaxwell https://www.reddit.com/r/Bitcoin/comments/438hx0/a_trip_to_the_moon_requires_a_rocket_with/

oleq

What is this all about?

This tutorial will turn your Raspberry PI into a simple Bluetooth audio receiver, which plays music through connected speakers. It's like a regular car audio system, but it can be used anywhere and it's a good value.

   Audio source (i.e. smartphone) 
                |
                v
 (((  Wireless Bluetooth Channel  )))
 |

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

davecgh

Table of Contents

1. Overview
2. Getting Started

### 1. Overview

When developing bitcoin applications or testing potential changes, it is often extremely useful to have a test network where transactions are actually mined into blocks and difficulty levels are low enough to generate blocks as needed.

In order to facilitate these scenarios, btcd provides a simulation network (--simnet). The following is an overview of the most important properties that distinguish it from the main network:

renzok

FROM debian:jessie

ENV USER=boatswain USER_ID=1000 USER_GID=1000

# now creating user
RUN groupadd --gid "${USER_GID}" "${USER}" && \
    useradd \
      --uid ${USER_ID} \
      --gid ${USER_GID} \
      --create-home \

harding

Working With Multiple Repositories On GitHub

Most projects on GitHub have a main repository that's the focal point of activity. For example, the Example organization has the Example.com repository:

https://github.com/example/example.com

Developers of Example.com typically call this the 'upstream' repository. We'll come back to it in a moment.

laanwj

This has moved to https://github.com/bitcoin/bitcoin/blob/master/doc/reduce-memory.md

gavinandresen

O(1) Block Propagation

The problem

Bitcoin miners want their newly-found blocks to propagate across the network as quickly as possible, because every millisecond of delay increases the chances that another block, found at about the same time, wins the "block race."