christopher-baek

Configure ddclient with Namecheap

Namecheap Configuration

1. Click the Manage button next to the domain in the Domain List view
2. In the Domain tab, scroll down and remove any entries in the Redirect Domain list
3. In the Advanced DNS tab...
4. Turn on Dynamic DNS and make a note of the password
5. Add an A Record for @ pointing to 127.0.0.1

MaxXor

Arch Linux GPU-Passthrough

A quick guide on how to setup a GPU-Passthorugh. Below are some of my Resources

• https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF
• https://www.evonide.com/non-root-gpu-passthrough-setup/
• https://dominicm.com/gpu-passthrough-qemu-arch-linux/

The Arch Wiki is the goto place for additional information and performance tweaks like CPU-Pinning.

Requirements

• IGPU or second dedicated GPU for Host system (unless you want to go the hard way and use one GPU for HOST and GUEST)

rawsh

• Download wii usb helper https://github.com/FailedShack/USBHelperInstaller/releases
• Create emulation and games directory (Documents/CEMU/Games)
• Download CEMU http://cemu.info/ and extract to emulation directory (Documents/CEMU/cemu)
• Download CEMUhook and extract to the same directory https://cemuhook.sshnuke.net/
• Launch wii usb helper and use vault.titlekeys.ovh as the title key site (database)
• Search Breath Of the Wild and select Add, Add Update, and Add DLC then click download on the bottom left
• Download the Cache from here and move it to the folder cemu/shaderCache/transferable With Vulkan backend you don't need a transferable shader cache.
• Launch the cemu executable. Click input and Xinput then select the controller and map buttons. Set CPU -> triple core recompiler in the top bar settings.
• Click prepare game for emulation in Wii USB Helper then "Play this game on PC" (you can also add

supix

The problem

In some cases, it is possible that PostgreSQL tables get corrupted. This can happen in case of hardware failures (e.g. hard disk drives with write-back cache enabled, RAID controllers with faulty/worn out battery backup, etc.), as clearly reported in this wiki page. Furthermore, it can happen in case of incorrect setup, as well.

One of the symptoms of such corruptions is the following message:

ERROR: missing chunk number 0 for toast value 123456 in pg_toast_45678

This almost surely indicates that a corrupted chunk is present within a table file. But there is a good way to get rid of it.

hadifarnoud

Host Your Site Under Your Domain on IPFS

This is a step-by-step tutorial for hosting your website under your domain on IPFS, from zero, on a DigitalOcean Ubuntu 16.04.3 x64 Droplet (i am using the $10 variant with 2GB RAM).

Install IPFS

Log in as root.

First, make sure the system is up to date, and install tar and wget:

denizssch

FCKGW-RHQQ2-YXRKT-8TG6W-2B7Q8

Windows XP PRO Corporate serial number S/N: Key: MQPWW-PGVKX-YPMKG-8DH3G-KC8PW
windows xp home edition serial number S/N: 034634-262024-171505-828316-729010-413531-800424-400442
Windows XP 64 serial number S/N: B2RBK-7KPT9-4JP6X-QQFWM-PJD6G
Windows XP serial number S/N: K6C2K-KY62K-DQR84-RD4QV-QB74Q
Windows XP Professional 64-bit Corporate Edition 5.2.3790.1830 serial number S/N: VCFQD-V9FX9-46WVH-K3CD4-4J3JM
Microsoft Windows XP Professional SP2 serial number S/N: YY8F2-3CKVQ-RKTRG-6JMDR-9DTG6
Windows XP Professional Service Pack 1 sp1 serial number S/N: F46YY - 2R8VQ - R8GMY - 926VK - 6BQ73
Windows XP Pro serial number S/N: KBWR7-76BD8-J7MDQ-KKG&C-V9Q2J

LukeSmithxyz

# Luke's config for the Zoomer Shell

# Enable colors and change prompt:
autoload -U colors && colors
PS1="%B%{$fg[red]%}[%{$fg[yellow]%}%n%{$fg[green]%}@%{$fg[blue]%}%M %{$fg[magenta]%}%~%{$fg[red]%}]%{$reset_color%}$%b "

# History in cache directory:
HISTSIZE=10000
SAVEHIST=10000
HISTFILE=~/.cache/zsh/history

lbrame

Arch Linux tweaks

This is a collection of the tweaks and modification I've made to my Arch Linux installation over the months. These may be applicable to other distros, but please check first before doing anything. I also included Arch Wiki references for all the procedures I mentioned. My recommendation is not to blindly follow this gist but to always check with the Arch Linux wiki first. Things move fast and by the time you're reading this my gist may be out of date. Lastly, the golden rule: never execute a command you don't understand.

Installing the KDE Plasma desktop

My current DE of choice is KDE's Plasma. I find it just about perfect.

There are various ways to install it on Arch. The most popular one is to install plasma and plasma-applications, but I don't like doing that because it comes with too many programs I'll never use. I, instead, install the base plasma group, remove the few extra packages that come with it, then I finish off by installing a few KDE apps that don't come with th

valyakuttan

Setup tor proxy on Arch Linux

Copied from this article.

Installation

1. Install tor

        $ sudo pacman -S tor
        $ ## nyx provides a terminal status monitor for bandwidth usage, connection details and more.

$ sudo pacman -S nyx

keilmillerjr

Creating an AUR Package

Maintainer: Keil Miller Jr

How to create and manage an AUR package.

The following link should be read:

• Creating packages
• AUR submission guidelines