blippy

#!/usr/bin/env perl6

# Reference:
# https://wiki.osdev.org/Partition_Table

my %ids = 0x00 => "Empty", 0x0b => "W95 FAT32", 0x0c => "W95 FAT32 (LBA)",
        0x82 => "Linux swap", 0x83 => "Linux", 0x93 => "Amoeba";

sub MAIN($filename) {
        say "Disk: $filename";

blippy

grammar G {
	token TOP { <atom>* }
	token atom { 	IFX { print "\n.. GOT IFX..\n"; } 
			| IF {print "\n--GOT IF--\n"; }  
			| .  { print $/; }
		}
}

my $str = "heIFllIFXo\n";

blippy

-----------------------------------------------
--- Set Variables ---
-----------------------------------------------
--- WIFI CONFIGURATION ---
WIFI_SSID = ""
WIFI_PASSWORD = ""
WIFI_SIGNAL_MODE = wifi.PHYMODE_N

--- IP CONFIG (Leave blank to use DHCP) ---
ESP8266_IP="192.168.0.30"

blippy

: nneg 0 >= ;
: <times postpone >r postpone begin postpone r> postpone 1- postpone dup 
         postpone >r postpone nneg postpone while ; immediate
: times> postpone repeat postpone rdrop ; immediate

\ Simple usage:
: eg1 5 <times '. emit times> cr ;
eg1

\ You can even embed blocks:

blippy

%serialconnect to --port=/dev/ttyUSB1 # for Jupyter

import machine, ssd1306
i2c = machine.I2C(-1, scl=machine.Pin(22), sda=machine.Pin(21))
oled = ssd1306.SSD1306_I2C(128, 64, i2c)
oled.fill(0) 
oled.text('MicroPython on', 0, 0)
oled.text('attached SSD1306', 0, 20)
oled.text('OLED display', 0, 30)

blippy

#include <Arduino.h>
#include <WiFi.h>
#include <driver/dac.h>

const int dataPin = 4; // Blinkt pin 16
const int clockPin = 5; // blinkt pin 18
const int numLEDs = 8;
uint8_t pixels[numLEDs * 3];

void spi_out(uint8_t n) {

blippy

#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/gpio.h"
#include "sdkconfig.h"
#include <driver/dac.h>

// The 8-bit values in our sound sample
#include "track.h"

blippy

/* Blink Example

   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>

blippy

from machine import Pin, SPI
import ntptime
from utime import sleep_ms
import utime

import mel

rs_pin = Pin(2, Pin.OUT) # Pin D4. Do NOT use the regular MISO pin (D6)
cs_pin = Pin(15, Pin.OUT) # aka SS slave select
cs_pin.on()

blippy

import machine
import network
import time

# because we use onbaord GPIO, we invert the meaning of the pin
# so 0 turns it on, 1 turn it off
pin = machine.Pin(16, machine.Pin.OUT)
def poff(): pin.value(1)
def pon(): pin.value(0)
poff()