Caleb Connolly calebccff

Name	Model	Attempted to flash	Slot	Symptoms
Fajita	A6013	Halium	a	Device would not turn on at all, booted into QCOM mode to recovery mode.

This gist it deprecated and may be outdated, latest instructions are on the wiki

pmbootstrap init pick oneplus -> enchilada/fajita. Pick any WM/DE you like, the following have been tested and are functional.

	#!/bin/bash

	# basically what at-to_bootloader_hard does, turns off the USB port the phone is connected to so that
	# VBUS is low and the device won't go to EDL (yay oneplus)
	# then sends a byte to the arduino to tell it to perform a hard reboot by pressing volume up and power
	# finally turn the usb port back on
	# sudo uhubctl -a off -p 2 -n 2109:2812 && printf "%b" "\0x01" > /dev/ttyACM0 && sleep 15 && sudo uhubctl -a on -p 2 -n 2109:2812

	export TOOLSDIR=$HOME/pmos/tools

	#!/bin/bash

	exec &> /var/log/sdm845-modem-prepare.log

	AID=$(qmicli -d qrtr://0 -p --uim-get-card-status \| grep -E "([A-Z0-9]{2}:){15}[A-Z0-9]{2}" \| xargs)

	while [ -z "$AID" ]; do
	sleep 2
	AID=$(qmicli -d qrtr://0 -p --uim-get-card-status \| grep -E "([A-Z0-9]{2}:){15}[A-Z0-9]{2}" \| xargs)
	done

	Yeah, you can get it going in postmarketOS by using my pmaports branch here: https://gitlab.com/sdm845-mainline/pmaports/-/tree/mm-tracking

	You'll need to get rid of the top commit it was just for my testing and doesn't work.
	Checkout HEAD~1 ("modemmanager: QRTR testing") and then change the modem manager APKBUILD to use this branch: https://gitlab.freedesktop.org/aleksm/ModemManager/-/tree/aleksander/qmap-settings-udev (from !501). Then:

	pmbootstrap checksum modemmanager
	pmbootstrap build libqrtr-glib --arch aarch64
	pmbootstrap build libqmi -- arch aarch64
	pmbootstrap build modemmanager -- arch aarch64

	#!/bin/zsh

	METADATA=$(sp metadata)

	# Example
	#trackid\|spotify:track:6NKuZs5wDpbkJaAFfKz5lI
	#trackNumber\|11
	#discNumber\|1
	#url\|https://open.spotify.com/track/6NKuZs5wDpbkJaAFfKz5lI
	#autoRating\|0.42

	-- Logs begin at Mon 2020-08-10 13:38:50 BST, end at Thu 2020-08-13 13:07:47 BST. --
	Aug 10 23:40:27 cheetah systemd[1]: Starting Fingerprint Authentication Daemon...
	-- Subject: A start job for unit fprintd.service has begun execution
	-- Defined-By: systemd
	-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
	--
	-- A start job for unit fprintd.service has begun execution.
	--
	-- The job identifier is 3156.
	Aug 10 23:40:27 cheetah fprintd[53466]: Device responded with error: 789

	#!/bin/bash

	OUT="$HOME/pmos/mainline-boot.img"
	DTB="$PWD/.output/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb"
	IMAGE="$PWD/.output/arch/arm64/boot/Image.gz"

	THIS="$(basename $0)"

	die() {
	echo $1 1>&2

	#!/bin/sh

	# Originally from: https://gitlab.com/postmarketOS/pmaports/-/blob/master/main/postmarketos-mkinitfs/init_functions.sh#L264
	# See: https://www.kernel.org/doc/Documentation/usb/gadget_configfs.txt

	mkdir -p /config
	mount none -t configfs /config

	CONFIGFS=/config/usb_gadget

	#!/bin/bash

	# bandcamp-multidl.sh URL [DESTINATION]

	if [ -z $1 ]; then
	echo "No URL specified"
	exit 1
	fi

	if [ ! which bandcamp-dl ]; then