Chris Baughman cmartinbaughman

####Un-Root Accept HTC OTA, then Re-Root Again, In 15 Minutes

Rename the file to PG86IMG.zip then mount phone as drive and copy zip file to /sdcard/

Then open cmd prompt (Win32) or terminal (Linux/OSX) and carefully type:

Boot to Gecko (B2G)

Boot to Gecko aims to create a complete, standalone operating system for the open web.

You can read more about B2G here:

follow us on twitter: @Boot2Gecko

	#Cracking an FTP server (use whatever service you want THC Hydra supports lots!
	hydra -L wordlist.txt -P passlist.txt 192.168.1.1 ftp

	#Other handy THC Hydra commands~!
	#Log in to ftp service with -l user and -p password:
	./hydra -l john -p doe 192.168.0.1 ftp

	#Log in to IMAP service using user wordlist with -L user.txt and the password -p secret:
	./hydra -L user.txt -p secret 192.168.0.1 imap PLAIN

	Tested/Working:
	##775# - EPST/PRL - PRL Settings
	##786# - EPST - Status Menu
	##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
	##33284# - Debug - Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
	##3424# - Diagnostic - Connect to phone in diag mode
	##2539# - EPST/A-Key - Data A key menu
	##7738# - EPST/P_Rev - Protocol Revision
	##8626337# - EPST/Vocoder - Unsure
	##4772579# - Reset the GPS

	#!/system/bin/sh

	echo "98" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold
	echo "80" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold_at_min_freq
	echo "30000" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_rate
	echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_down_factor
	echo "5" > /sys/devices/system/cpu/cpufreq/pegasusq/down_differential
	echo "4" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_step
	echo "384000" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_for_responsiveness
	echo "15" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_up_rate

	(转）creating binary patch files (.p files) with bsdiff
	I was looking through a .602 update.zip and noticed the .p files; I opened one up in notepad++ and saw that the file begins with "bsdiff" so did a search and found this tool:

	http://www.daemonology.net/bsdiff/

	bsdiff takes an original file and a modified file as input and creates a binary patch file.
	bspatch takes an original file and a patch file as input and creates a modified file.

	usage (windows):

	Password hashes are stored in the registry, in the key HKLM\Security\Sam. Normally you must have administrator privileges to access it. Even you are the local admin – you still have to assign manually full control permission for this subkey to yourself.

	The juicy stuff physically is stored in two files:
	C:\windows\system32\config\sam
	and
	C:\windows\system32\config\system

	http://www.codeproject.com/KB/files/FDump.aspx is a tool that can dump file sectors directly from disk using logical offsets.

	C:\windows\system32\config\sam and C:\windows\system32\config\system in target system (the second one is needed because of the “boot key” is stored there) so then we may process it somewhere else with Cain & Abel.

	Without CDMA Workshop or QPST:
	http://androidforums.com/boost-mobile-warp-all-things-root/532142-guide-how-change-your-msl-prl-not-cdma-workshop.html#post4232529

	Using QPST:
	(Change Sprint Banner in Firmware how to, including QPST set up)
	1. Install HTC Sync if you haven't already.
	2. Use the CDMA Method posted Here to get your MSL. Thanks techwerkz - Or Call Sprint. Another alternative would be to gain temp root and use MSL Reader from the market.
	3. Download QPST:
	http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/models/qpst/12051/download.html
	4. Install QPST software

	So run off and install git on your Linux system using the package
	manager you are comfortable with (personally, I use openSUSE, and a
	simple 'zypper install git' does everything that is needed.)

	Then start by cloning the main Linux kernel repository:

	$ mkdir ~/linux
	$ cd ~/linux
	$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git