palopezv

/**
 * dwmconfig.h 
 * Hardware multimedia keys
 */
/* Somewhere at the beginning of config.h include: */

/* 
 You obviously need the X11 development packages installed, X11proto in particular, but 
 here is the location of the keysyms header upstream copy if you can't bother 
 using the contents of your own hard drive. ;-P

zthxxx

Note

For every body who using Win10/11 with new Office that you need to know:

to active Office without crack, just follow https://github.com/WindowsAddict/IDM-Activation-Script,

you wiil only need to run

irm https://massgrave.dev/ias | iex

theramiyer

Install Arch Linux (ARM) on Raspberry Pi B+

Created 17 Aug 2018

This is a simple installation that I did on my Raspberry Pi. Of course, this is only one of the many reasons to do it.

Here are my requirements:

rokibhasansagar

How To Make A Working TWRP Device Tree For Your MediaTek Device & Start Building Them, Online

This Guide is tested on 64-bit mt6735/53 chipset device. It will also work on any 64-bit and 32-bit devices.

You will need something from your Stock ROM first. Get them all and Try to modify it using the procedure.

Note: This guide will be helpful for you if you have older mediatek devices (android-5.1 or android-6.0), but up-to-date devices can also work.

Update: This guide had a few typos and derps (Oops..), but I've tried to make it free of those now (Dated November 18, 2020)

Bonus: You can also use this tool by @SebaUbuntu, @yshalsager and @mauronofrio to auto generate the twrp tree. The tool is best if your device runs on android-9.0. The tools is still not 100% compatible to all devices, but I'll still recommend it and give it 8.5/10 in the scale of varsatility.