d6e

Installation:

1. Place hyperboria.sh in /etc/init.d/hyperboria
2. chmod +x /etc/init.d/hyperboria
3. update-rc.d hyperboria defaults

This will cause it to automatically start with your computer. You can control it with /etc/init.d/hyperboria . Some systems (Ubuntu, not sure about others) allow you to use the service command, which shortens the command to `service hyperboria

d6e

sudo apt-get update
sudo apt-get install python-dev git python-pip automake libtool libssl-dev
git clone https://github.com/numenta/nupic.git
mkdir -p nta/eng
echo "
export NTA=$HOME/nta/eng
export NUPIC=$HOME/nupic
export BUILDDIR=/tmp/ntabuild
export MK_JOBS=3
source $HOME/nupic/env.sh" >> ~/.bashrc

d6e

// /etc/port-forward.json dont forget to delete this line since comments are not valid JSON
// These are just sample values, obviously you'll want to change most of it
{
  "public-if": "enp5s0",
  "port-forwards": {
    "80": "10.5.0.80:80",
    "443": "10.5.0.80:443",
    "8443": "10.5.0.60:8443",
    "5222": "10.5.0.198:5222",
    "5269": "10.5.0.198:5269",