ianfinch

#!/bin/bash
# Set up a Raspberry Pi 4 as a USB-C Ethernet Gadget
# Based on:
#     - https://www.hardill.me.uk/wordpress/2019/11/02/pi4-usb-c-gadget/
#     - https://pastebin.com/VtAusEmf

if ! $(grep -q dtoverlay=dwc2 /boot/config.txt) ; then
    echo "Add the line dtoverlay=dwc2 to /boot/config.txt"
    exit
fi

brgaulin

This gist uses the idf-release/v4.2 release of arduino-esp32, can be found here: https://github.com/espressif/arduino-esp32/tree/idf-release/v4.2

ThePredators

⭐ Setup Mobile Development Environment

⚠️ The following configuration has been tested on Intel, M1 & M2 Ships ⚠️

Pre-requisit :

If you have any issues with macOS, or need anything related to it check this documentation

Install Xcode Command Line tools :

dacoffey

address=/api.pwnedpasswords.com/

dacoffey

"editor.tokenColorCustomizations": { "comments": "#c0c0c0" }

"workbench.colorCustomizations": {
    "terminal.foreground" : "#ffffff",
    "terminal.background" : "#000000",
    "terminal.ansiRed": "#ff8888",
    "terminal.ansiBrightBlack": "#aaaaaa"
}

dacoffey

git reset HEAD~1

dacoffey

require('http').createServer((req,res)=>{ res.writeHead(200); res.end('HELLOWORLD'); }).listen(80,'0.0.0.0');

dacoffey

#include <Adafruit_LEDBackpack.h>
Adafruit_7segment LEDSEG;

esphome::time::ESPTime DTNOW;
char DTSTR[17];
time_t DT;