| # Source: https://gist.github.com/ed8ad113fff4322ef309198d5455687f | |
| ############################################################################################## | |
| # Full App Lifecycle In Kubernetes With Argo CD, DevSpace, vCluster, k3d, and GitHub Actions # | |
| # https://youtu.be/uU-EAQ8Vbvk # | |
| ############################################################################################## | |
| # Referenced videos: | |
| # - How To Create Virtual Kubernetes Clusters With vcluster By loft: https://youtu.be/JqBjpvp268Y | |
| # - DevSpace - Development Environments in Kubernetes: https://youtu.be/nQly_CEjJc4 |
This is an initiative to create an overview of the issues found with the Creality CR-6 SE.
As of this writing (2020-09-19) the large number of the motherboard issues have not been publicly acknowledged. Hopefully this overview forces Creality to acknowledge the issues with the Creality CR-6 SE leveling free 3d printer.
According to Creality all issues should be resolved in the newer models:
Here are the improvements we did as below:
With most of the CR-6 SE issues being due to bad wiring or loose/too tight screws I feel like it is time for a good post-unboxing checklist, to be walked through pre-assembly. Even though I do not have my unit shipped yet, I've seen enough issues and fixes that I can compile this post.
I initially posted this on the independent CR-6 community Facebook group but since not everyone wants to use Facebook (which I totally understand), I will repost it here. I mirrored most of the relevant content of Facebook to imgur.
If you have any feedback or anything that needs to be added, please let me know and I will amend this post!
Note: There are some known issues with this printer - please read the entire guide. (It is long, I know, but this is a necessary evil!)
| Message pattern: ^time="(.*)" level=([^\s]+) .*$ | |
| Message start pattern: ^time= | |
| Time format: yyyy-MM-dd'T'HH:mm:ssXXX | |
| Time capture group: 1 | |
| Serverity capture group: 2 | |
| Reference: https://github.com/JetBrains/ideolog/wiki/Custom-Log-Formats |
Reasons:
- UNIX standard
- If the last line in a file doesn't end with a newline then addition of next line affects two lines instead of one. This also pollutes diff on multiple files, so reader may wonder what has changed in a line whereas no significant change has occured.
Multiple newlines at the file end are also redundant as well as spaces at the end of line.
| #!/usr/bin/env bash | |
| # Usage: sudo ./restore_functionality.sh | |
| #ps aux | grep sentinel | awk -F " +" '{print $2}' | xargs kill | |
| while true; do | |
| launchctl kill SIGKILL system/com.crowdstrike.falcond | |
| launchctl kill SIGKILL system/com.crowdstrike.userdaemon | |
| launchctl kill SIGKILL system/com.sentinelone.sentineld | |
| launchctl kill SIGKILL system/com.sentinelone.sentineld-helper |
| #!/usr/bin/env python3 | |
| # | |
| # Query AWS Athena using SQL | |
| # Copyright (c) Alexey Baikov <sysboss[at]mail.ru> | |
| # | |
| # This snippet is a basic example to query Athen and load the results | |
| # to a variable. | |
| # | |
| # Requirements: | |
| # > pip3 install boto3 botocore retrying |
Notice: I might make a big revision someday to review everything, fix anything that needs fixing, and explain the reason for each step. Maybe.
- Arch Linux now comes with an installer, so if you just want a minimal system ready in a few minutes, you're better off just doing
archinstall. - This guide is for UEFI only, not BIOS.
- The only officially supported architecture by Arch Linux is x86_64, so make sure your computer uses that architecture before attempting to install it.
- Some computers won't work out of the box because of bugs left by the manufacturers.