Skip to content

Instantly share code, notes, and snippets.

View david-staas's full-sized avatar

David Staas david-staas

1 follower · 0 following
  • Vancouver, WA / Portland, OR Area
View GitHub Profile
@codeniko
codeniko / UNMS-Unifi-Pi-Buster.md
Last active June 22, 2023 02:23
Setup UNMS and Unifi network controller on Raspberry pi 4 Raspbian buster

Setup Raspbian Buster

I'm using debian 10 as my daily so these are *nix commands. Mac should work with these too but you're on your own if you're using Windows. Goal for me is to make a headless raspberry pi I can SSH into and connect to my network using Ethernet. You should be comfortable in command line if you choose to follow this guide.

  1. Go to https://www.raspberrypi.org/downloads/raspbian and download Raspbian lite archive
  2. unzip the image
  3. Plug in sdcard. Run lsblk to see drives and mount points. Likely, the sdcard will show up in /dev/sda or /dev/sdb and may have some partitions like /dev/sda1 and /dev/sda2.
  4. If partitions are mounted, unmount all of them. Ex: umount /dev/sda1 and umount /dev/sda2
  5. Copy the raspbian image to the sdcard with sudo dd if=RASPBIAN_IMAGE_FILE.img of=/dev/sda bs=4M
  6. Run sync to ensure the written contents are flushed
  7. OPTIONAL: To start ssh server on boot, Unplug sdcard and reinsert to remount new partitions. You'll have two with raspbian.
@microlinux
microlinux / shif.sh
Created August 25, 2015 02:08
A script to add commands to EdgeOS that show ethernet/vif traffic
#!/bin/bash
# a script to add commands to EdgeOS that show ethernet/vif traffic
#
# default measurement period is 5 seconds
# probably extendable to any interface in /proc/net/dev
# see 'shif.sh -h' for standalone use
#
# install: sudo chmod 755 shif.sh
# sudo ./shif.sh install