David Ferguson dferg

tmux shortcuts & cheatsheet

start new:

tmux

start new with session name:

tmux new -s myname

Introduction

This howto describes installing entware for the Tomato open-source router firmware.

Requirements

USB stick - 1G or more in size
USB-capable router running TomatoUSB.

This Howto Was Tested With

Introduction

This howto describes installing the extra kernel modules for the Tomato open-source router firmware. We will install them in the /opt/extras area.

Requirements

Router running Shibby's fork of TomatoUSB
entware installed to a USB stick mounted at /opt

This Howto Was Tested With

Introduction

This howto describes setting up a LT2P over IPsec VPN server on your router with TomatoUSB firmware. This should allow you to connect using the built-in client to your Mac, iPhone or Android device. (Not sure about Windows.)

At the end of this tutorial, you should have a L2TP/IPsec VPN server that starts automatically on boot. Mac/iPhone/Android devices can connect with their native client and will be assigned an IP address within your LAN subnet. They should be able to talk to other devices on your LAN and should be able to contact hosts on the Internet NAT'd behind your WAN IP address.

Requirements

Router running Shibby's fork of TomatoUSB
entware installed to a USB stick mounted at /opt (howto)

Install Docker on Proxmox 4

Proxmox 4 is based on Debian Jessie. Reference for this install: https://docs.docker.com/engine/installation/linux/debian/#/install-using-the-repository

Add the Docker repo for Debian Jessie

$ apt-get install curl
$ curl -fsSL https://apt.dockerproject.org/gpg | apt-key add -
$ echo "deb https://apt.dockerproject.org/repo/ debian-jessie main" > /etc/apt/sources.list.d/docker.list

$ apt-get update

Introduction

Sometimes you may want to use a DNS server for specific domain requests and another DNS server for all other requests. This is helpful, for instance, when connected to a VPN. For hosts behind that VPN you want to use the VPN's DNS server but all other hosts you want to use Google's public DNS. This is called "DNS splitting."

Here, we run dnsmasq as a background service on macOS. The dnsmasq configuration described below implements DNS splitting.

Install

brew install dnsmasq

	sudo find /private/var/folders/ -name com.apple.dock.iconcache -exec rm {} \;
	sudo killall Dock