PierreZ

#configuration of router
	conf t
	hostname ""
	enable secret ""
	line console 0
	logging synchronous
	password ""
	login
	exit
	line vty 0 4

mietek

Set up L2TP/IPsec VPN on Debian

Set up IPsec

Set up networking

Era-Dorta

# VERY IMPORTANT! After each kernel update or dkms rebuild the modules must be signed again with the script
# ~/.ssl/sign-all-modules.sh

# Place all files in ~/.ssl folder
mkdir ~/.ssl
cd ~/.ssl

# Generate custom keys with openssl
openssl req -new -x509 -newkey rsa:2048 -keyout MOK.priv -outform DER -out MOK.der -nodes  -subj "/CN=Owner/"

Hengjie

How to passthrough SATA drives directly on VMWare EXSI 6.5 as RDMs

There aren't many tutorials about this, the only tutorials I've found were about passing through entire PCIe cards to VMs, or refered to old ESXI versions (below 6.5) that used a more comprehensive desktop client instead of the web app. In v6.5, the web app was introduced and the desktop client was deprecated. You used to be able to setup RDMs in the desktop client, but with the introduction of the web console, this is no longer the case. This tutorial shows you how to pass SATA HDDs to the virtual machine on VMWare ESXI 6.5. This tutorial is partially based on VMWare's own KB and the now deprecated Forza IT blog post.

A word about VMWare ESXI 6.7

There is now an option while editing your VM's settings to add a New raw disk when you click `Add ha

gustavorv86

deb http://deb.debian.org/debian bullseye main contrib non-free
deb-src http://deb.debian.org/debian bullseye main contrib non-free

deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-free
deb-src http://deb.debian.org/debian-security/ bullseye-security main contrib non-free

deb http://deb.debian.org/debian bullseye-updates main contrib non-free
deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free

pd12bbf7608ae1

#!/bin/bash

PrivateKey=$(wg genkey)
PublicKey=$(echo "$PrivateKey" | wg pubkey)

echo "PublicKey=${PublicKey} # PrivateKey=${PrivateKey}"

nitred

About

• I faced bandwidth issues between a WG Peer and a WG server. Download bandwidth when downloading from WG Server to WG peer was reduced significantly and upload bandwidth was practically non existent.
• I found a few reddit posts that said that we need to choose the right MTU. So I wrote a script to find an optimal MTU.
• Ideally I would have liked to have run all possible MTU configurations for both WG Server and WG Peer but for simplicity I choose to fix the WG Server to the original 1420 MTU and tried all MTUs from 1280 to 1500 for the WG Peer.

Testing

• On WG server, I started an iperf3 server
• On WG peer, I wrote a script that does the following:
  • wg-quick down wg0
• Edit MTU in the /etc/wireguard/wg0.conf file