SD card slot is on its own separate PCB connected via a 8-pin JST PH (?) jumper cable.
Tested with 2GB SD card formatted with FAT16. Cards smaller than 2GB might also work but are untested (since the smallest cards I got are 2GB).
(Official spec stated that it supports 128MB-2GB SD cards formatted with FAT16.)
| Name | Author | Sensor Type | Construction | Controller Type | # of Controllers | # of Segments | LED Controller Type | # of LEDs/Pixels | Protocol | Open-source? |
|---|---|---|---|---|---|---|---|---|---|---|
| 837-15275 | SEGA | Capacitive | FR4 PCB | CY8C22345-24SXI | 2 | 32 | THL3504 | 64/32 | sega-slider/UART/RS232 | No |
| (No name) | benjilei | Capacitive | Pad hack (aggregated DS4 touchpad) | MXT series or TrueTouch series (DS4 Touchpad)+? | 4? | 80? (virtual) | None | 0 | maxTouch (or TrueTouch)/I2C | No (aggregation method unknown) |
| [(No name)][fa40] | fa40 | Capacitive | Pad hack (copper foil on wood substrate) | ZET6223 (Brook Touchpad) | 1 | 17 | None | 0 | ZET6223/I2C | N/A |
| (No name) | Mo10 | Capacitive | FR4 PCB | CY8C4104LQI-422 | 4 | 32 | WS2812 | 32 | Proprietary/I2C | No |
| #!/usr/bin/env python2 | |
| import yaml | |
| import struct | |
| import os | |
| SUFFIX = ( | |
| '.m4a', | |
| '_e.sht', | |
| '_n.sht', | |
| '_h.sht', |
| #!/usr/bin/env python3 | |
| import hid | |
| import os | |
| import contextlib | |
| import time | |
| if __name__ == '__main__': | |
| with contextlib.closing(hid.device()) as dev: | |
| dev.open(0x054c, 0x0ce6) |
| <?xml version="1.0"?> | |
| <!-- | |
| DualSense (DS5) USB HID Report Descriptor | |
| Documentation WIP | |
| TODO: Extract info from hid-playstation and cross-verify with us. | |
| --> |
| diff --git a/kpartx/Makefile b/kpartx/Makefile | |
| index 2906a984..0404f029 100644 | |
| --- a/kpartx/Makefile | |
| +++ b/kpartx/Makefile | |
| @@ -13,7 +13,7 @@ ifneq ($(call check_func,dm_task_set_cookie,/usr/include/libdevmapper.h),0) | |
| endif | |
| OBJS = bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o \ | |
| - gpt.o mac.o ps3.o crc32.o lopart.o xstrncpy.o devmapper.o | |
| + gpt.o mac.o ps3.o psvita.o crc32.o lopart.o xstrncpy.o devmapper.o |
| <?xml version="1.0" encoding="UTF-8"?> | |
| <inkscape-extension xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"> | |
| <_name>PTouch Tape</_name> | |
| <id>org.inkscape.render.ptouch_tape2</id> | |
| <dependency type="executable" location="extensions">ptouch_tape2.py</dependency> | |
| <dependency type="executable" location="extensions">inkex.py</dependency> | |
| <!-- TODO Not sure about the valid printing region (conflicts with what | |
| datasheet says). More tests needed. --> | |
| <!-- Format: width,valid_width,offset --> |
