sbull

# -- Rule engine initialization ----------------------------------------------

# Enable ModSecurity, attaching it to every transaction. Use detection
# only to start with, because that minimises the chances of post-installation
# disruption.
#
SecRuleEngine DetectionOnly


# -- Request body handling ---------------------------------------------------

schtobia

#! /bin/sh
[ ! -d "$1" ] && echo "$1 is not a valid directory." && exit 1;
trap "umount \"${1}\"/tmp \"${1}\"/dev/null \"${1}\"/dev/pts \"${1}\"/dev/random \"${1}\"/dev/shm \"${1}\"/dev/urandom \"${1}\"/proc" EXIT INT TERM HUP PIPE &&
    mount --bind /tmp "${1}/tmp" && \
    mount --bind /dev/null "${1}/dev/null" && \
    mount --bind /dev/pts "${1}/dev/pts" && \
    mount --bind /dev/random "${1}/dev/random" && \
    mount --bind /dev/shm "${1}/dev/shm" && \
    mount --bind /dev/urandom "${1}/dev/urandom" && \
    mount --bind /proc "${1}/proc" && \

hrchu

# Configuration file for runtime kernel parameters.
# See sysctl.conf(5) for more information.

# See also http://www.nateware.com/linux-network-tuning-for-2013.html for
# an explanation about some of these parameters, and instructions for
# a few other tweaks outside this file.

# See evil packets in your logs.
net.ipv4.conf.all.log_martians = 1

xigang

import "regexp"

// Basic regular expressions for validating strings
const (
	Email          string = "^(((([a-zA-Z]|\\d|[!#\\$%&'\\*\\+\\-\\/=\\?\\^_`{\\|}~]|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])+(\\.([a-zA-Z]|\\d|[!#\\$%&'\\*\\+\\-\\/=\\?\\^_`{\\|}~]|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])+)*)|((\\x22)((((\\x20|\\x09)*(\\x0d\\x0a))?(\\x20|\\x09)+)?(([\\x01-\\x08\\x0b\\x0c\\x0e-\\x1f\\x7f]|\\x21|[\\x23-\\x5b]|[\\x5d-\\x7e]|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])|(\\([\\x01-\\x09\\x0b\\x0c\\x0d-\\x7f]|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}]))))*(((\\x20|\\x09)*(\\x0d\\x0a))?(\\x20|\\x09)+)?(\\x22)))@((([a-zA-Z]|\\d|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])|(([a-zA-Z]|\\d|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])([a-zA-Z]|\\d|-|\\.|_|~|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])*([a-zA-Z]|\\d|[\\x{00A0}-\\x{D7FF}\\x{F900}-\\x{FDCF}\\x{FDF0}-\\x{FFEF}])))\\.)+(([a-zA-Z]|[\\

jatcwang

! model
  pc101           Generic 101-key PC
  pc102           Generic 102-key (Intl) PC
  pc104           Generic 104-key PC
  pc105           Generic 105-key (Intl) PC
  dell101         Dell 101-key PC
  latitude        Dell Latitude series laptop
  dellm65         Dell Precision M65
  everex          Everex STEPnote
  flexpro         Keytronic FlexPro

AfroThundr3007730

# OpenSSL root CA configuration file.

[ ca ]
default_ca = ca_default

[ ca_default ]
dir               = /etc/pki/CA/root-ca
certs             = $dir/certs
crl_dir           = $dir/crl
new_certs_dir     = $dir/newcerts

Krusen

# Run as Administrator
if (!([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) { Start-Process powershell.exe "-NoProfile -ExecutionPolicy Bypass -File `"$PSCommandPath`"" -Verb RunAs; exit }

Set-Location $PSScriptRoot

# Load configuration XML file.
[xml]$config = Get-Content "DatabasesConfig.xml"

#Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
#Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=12.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"

sergey-dryabzhinsky

###
# Proxmox or other server kernel params cheap tune and secure.
# Try it if you have heavy load on server - network or memory / disk.
# No harm assumed but keep your eyes open.
#
# @updated: 2020-02-06 - more params used, adjust some params values, more comments on params
#

### NETWORK ###

antirez

# LVDB - LLOOGG Memory DB
# Copyriht (C) 2009 Salvatore Sanfilippo <antirez@gmail.com>
# All Rights Reserved

# TODO
# - cron with cleanup of timedout clients, automatic dump
# - the dump should use array startsearch to write it line by line
#   and may just use gets to read element by element and load the whole state.
# - 'help','stopserver','saveandstopserver','save','load','reset','keys' commands.
# - ttl with milliseconds resolution 'ttl a 1000'. Check ttl in dump!

rayhassan

IO Performance:
--------------

NCQ - Native Cmd Queueing - SATA II - 32 cmds

TCQ - Tagged Cmd Queuing - SCSI 2 - 216 cmds possible (64 cmds supported by most disk queues)

- Reordering of cmds when requests for sectors spaced far from one another.

- attempts to reduce disk seek time and rotation latency by optimising order in which sectors are found.