Dries007 dries007

Source: https://www.homebrewtalk.com/forum/threads/joes-ancient-orange-mead-joam.45152/

1 gallon batch (=3.78 L)

3 1/2 lbs Clover or your choice honey or blend (will finish sweet) (=1.6 Kg)
1 Large orange (later cut in eights or smaller rind and all)
1 small handful of raisins (25 if you count but more or less ok)
1 stick of cinnamon
1 whole clove (or 2 if you like - these are potent critters)
optional (a pinch of nutmeg and allspice )(very small)

rPi Netboot TFTP setup

This is not a tutorial, it's some hints to get up and going. All of this assumes you are using Linux. (As you should!)

This setup will let you boot the rPi from a folder on your disk over the network. This makes life much easier if you are iterating over changes. All you need is an easy way to reboot the pi (cable with switch or a switchable power supply).

Based on documentation from rPi foundation.

Dobiss Domotica / Home Automation Protocols

This is information related to the Dobiss protocols that I have discovered by probing various things on my devices. My installation is a pair of modules marked "Dobiss Domotics Relay Module single pole 8 channel Model DO4511" connected by a black CAN cable. The button bus is connected to the first module.

WARNING Assume that anything you can touch or probe or poke a wire into is on LIVE VOLTAGE and will kill you if you touch it. I'm not responsible for whatever you decide to do with this information.

In particular make sure of the following: Measure that there is no voltage between the ground and your earch connection.

	.idea/
	out/highlight.conf