| // ==UserScript== | |
| // @name Soup.io vi keys | |
| // @namespace http://foosel.org/snippets/userscripts | |
| // @include http://*.soup.io/* | |
| // @description Enables jumping from post to post on soup.io by using the vi keys (j for next, k for previous; n and p are supported as well). | |
| // ==/UserScript== | |
| window.addEventListener("keydown", KeyCheck, true); | |
| function scrollDown() { | |
| var postOffset = 50; |
This is a case for the Bus Pirate v3.6 from Dangerous Prototypes as listed on Thingiverse to be printed on a 3D printer.
In order to compile this file to an STL you'll need OpenSCAD and also the file oshw.scad which you can find here on Thingiverse.
| #!/bin/bash | |
| vcgencmd version | |
| while true; do | |
| if [ "`vcgencmd get_camera`" = "supported=1 detected=1" ]; then | |
| logger "Starting webcam" | |
| pushd /home/pi/mjpg-streamer-experimental | |
| LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w ./www" -i "input_raspicam.so -d 100" | |
| popd | |
| fi |
| psuX=65; | |
| psuY=170; | |
| psuZ=40; | |
| wall=3; | |
| screw=2.8; | |
| earsX=10; | |
| earsY=40; | |
| zBlocker=6; |
| # Configuration for /etc/init.d/mjpg-streamer | |
| # The init.d script will only run if this variable non-empty. | |
| MJPG_STREAMER_USER="pi" | |
| # Where mjpg-streamer is installed, this is important! | |
| DAEMON_HOME=/home/pi/mjpg-streamer | |
| # What arguments to pass to mjpg-streamer, here is few examples; You can change them by commenting one and | |
| # uncommenting another: |
lsusb lists the fingerprint reader in the x240 as follows:
Bus 002 Device 003: ID 138a:0017 Validity Sensors, Inc.
There exists experimental driver support for this in a fork of libfprint for vfs5011 sensors, however you'll need to compile the driver yourself. To get the fingerprint sensor to work for lightdm login, su etc, follow these steps.
Install fingerprint-gui:
sudo add-apt-repository ppa:fingerprint/fingerprint-gui
.octoprint/plugins/filetab, .octoprint/plugins/filetab/templates and .octoprint/plugins/filetab/static/css__init__.py to .octoprint/plugins/filetabfiletab_tab.jinja2 to .octoprint/plugins/filetab/templatesfiletab.css to .octoprint/plugins/filetab/static/cssappearance.components.tab.order to list plugin_filetab in .octoprint/config.yaml if you want the "Files" tab to be placed somewhere else than after the regular tab components, e.g.:First experiments with NodeMCU to publish the current settings of my adjustable height working desk to MQTT.
NodeMCU can be found here: https://github.com/nodemcu/nodemcu-firmware
Note that you'll need a current version with support for floats (which the ultrasonic sensor library utilizes), I'm using 0.9.5 2015-03-18 with float support myself.
Support for the HC-SR04 sensor in NodeMCU can be found here: https://github.com/sza2/node_hcsr04
I provided my slightly adjusted version which makes measuring a non-blocking afair, allowing for callbacks when the measurement completes.
| 2014-10-23 16:58:02,141 - SERIAL - DEBUG - Enabling serial logging | |
| 2014-10-23 16:58:09,247 - SERIAL - DEBUG - Changing monitoring state from 'Operational' to 'Closed' | |
| 2014-10-23 16:58:13,303 - SERIAL - DEBUG - Connection closed, closing down monitor | |
| 2014-10-23 16:58:16,878 - SERIAL - DEBUG - Changing monitoring state from 'Offline' to 'Opening serial port' | |
| 2014-10-23 16:58:16,883 - SERIAL - DEBUG - Connecting to: /dev/ttyAMA0 | |
| 2014-10-23 16:58:16,922 - SERIAL - DEBUG - Connected to: Serial<id=0x1ad8fb0, open=True>(port='/dev/ttyAMA0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=20.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor | |
| 2014-10-23 16:58:16,926 - SERIAL - DEBUG - Changing monitoring state from 'Opening serial port' to 'Connecting' | |
| 2014-10-23 16:58:36,974 - SERIAL - DEBUG - Send: M105 | |
| 2014-10-23 16:58:37,000 - SERIAL - DEBUG - Recv: ok T:21.5 /0.0 B:21.1 /0.0 @:0% | |
| 2014-10-23 16:58:37,005 - SERIAL - DEBUG - Changing monitoring state from 'Connecting' to 'Operational' |