mailme-gx

#!/bin/bash
# Copyright (C) 2015
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of

tetkuz

Description

[Server] GStreamer ---> HTML [Client]

Require

• gstreamer-1.x
• Browser which supports video tag of HTML5

debian

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

staaldraad

# Gawk version
# Remote
grep -v "rem_address" /proc/net/tcp  | awk  '{x=strtonum("0x"substr($3,index($3,":")-2,2)); for (i=5; i>0; i-=2) x = x"."strtonum("0x"substr($3,i,2))}{print x":"strtonum("0x"substr($3,index($3,":")+1,4))}'

# Local
grep -v "rem_address" /proc/net/tcp | awk  '{x=strtonum("0x"substr($2,index($2,":")-2,2)); for (i=5; i>0; i-=2) x = x"."strtonum("0x"substr($2,i,2))}{print x":"strtonum("0x"substr($2,index($2,":")+1,4))}'

# No Gawk
# Local
grep -v "rem_address" /proc/net/tcp  | awk 'function hextodec(str,ret,n,i,k,c){

Juul

The purpose of this document is to get you familiar with the concepts and command line tools involved with connecting to the internet using modern 4G LTE modems on both Debian/Ubuntu and OpenWRT.

This writeup is based on my experiences with the Sierra Wireless AirPrime MC7455 modem and a Calyx (Sprint) SIM card, but it should apply to most modern 4G LTE modems.

High level overview

These are the steps required:

• Physically connect antennas

superboum

MIT LICENSE

Copyright 2018 Quentin Dufour

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR TH

qistoph

# Based on gist https://gist.github.com/staaldraad/4c4c80800ce15b6bef1c1186eaa8da9f
# - added TCP states

awk 'BEGIN{states["01"]="TCP_ESTABLISHED"
states["02"]="TCP_SYN_SENT"
states["03"]="TCP_SYN_RECV"
states["04"]="TCP_FIN_WAIT1"
states["05"]="TCP_FIN_WAIT2"
states["06"]="TCP_TIME_WAIT"
states["07"]="TCP_CLOSE"

1fexd

Patches und Anleitung wurden nach eGovPatchesAT/id-austria verschoben, dieser gist wird nicht mehr geupdated.

Alte Anleitung

ID Austria / Digitales Amt mit Root und/oder entsperrtem Bootloader

1. Ohne Root
2. Schritt 1: APK downloaden/extrahieren