Skip to content

Instantly share code, notes, and snippets.

View fphammerle's full-sized avatar

Fabian Peter Hammerle fphammerle

View GitHub Profile
@1fexd
1fexd / id_austria_root_patch.md
Last active January 28, 2025 15:30
ID Austria / Digitales Amt mit Root und/oder entsperrtem Bootloader
@qistoph
qistoph / awk_netstat.sh
Created August 6, 2020 07:55
AWK to get details from /proc/net/tcp and /proc/net/udp when netstat and lsof are not available
# Based on gist https://gist.github.com/staaldraad/4c4c80800ce15b6bef1c1186eaa8da9f
# - added TCP states
awk 'BEGIN{states["01"]="TCP_ESTABLISHED"
states["02"]="TCP_SYN_SENT"
states["03"]="TCP_SYN_RECV"
states["04"]="TCP_FIN_WAIT1"
states["05"]="TCP_FIN_WAIT2"
states["06"]="TCP_TIME_WAIT"
states["07"]="TCP_CLOSE"
@superboum
superboum / LICENCE.txt
Last active April 15, 2025 16:22
Install Debian with Debootstrap + Grub EFI
MIT LICENSE
Copyright 2018 Quentin Dufour
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR TH
@Juul
Juul / lte_mbim_from_scratch.md
Last active January 6, 2025 18:05
How to use 4G LTE modems like the MC7455 on both Debian/Ubuntu and OpenWRT using MBIM

The purpose of this document is to get you familiar with the concepts and command line tools involved with connecting to the internet using modern 4G LTE modems on both Debian/Ubuntu and OpenWRT.

This writeup is based on my experiences with the Sierra Wireless AirPrime MC7455 modem and a Calyx (Sprint) SIM card, but it should apply to most modern 4G LTE modems.

High level overview

These are the steps required:

  • Physically connect antennas
@staaldraad
staaldraad / awk_netstat.sh
Last active May 1, 2025 10:38
AWK to get details from /proc/net/tcp and /proc/net/udp when netstat and lsof are not available
# Gawk version
# Remote
grep -v "rem_address" /proc/net/tcp | awk '{x=strtonum("0x"substr($3,index($3,":")-2,2)); for (i=5; i>0; i-=2) x = x"."strtonum("0x"substr($3,i,2))}{print x":"strtonum("0x"substr($3,index($3,":")+1,4))}'
# Local
grep -v "rem_address" /proc/net/tcp | awk '{x=strtonum("0x"substr($2,index($2,":")-2,2)); for (i=5; i>0; i-=2) x = x"."strtonum("0x"substr($2,i,2))}{print x":"strtonum("0x"substr($2,index($2,":")+1,4))}'
# No Gawk
# Local
grep -v "rem_address" /proc/net/tcp | awk 'function hextodec(str,ret,n,i,k,c){
@gbaman
gbaman / HowToOTG.md
Last active March 26, 2025 10:11
Simple guide for setting up OTG modes on the Raspberry Pi Zero

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

@tetkuz
tetkuz / README.md
Last active April 24, 2025 00:00
GStreamer stream to HTML5

Description

[Server] GStreamer ---> HTML [Client]

Require

  • gstreamer-1.x
  • Browser which supports video tag of HTML5

debian

@mailme-gx
mailme-gx / eml2maildir.sh
Last active March 5, 2025 09:37 — forked from targzeta/eml2maildir.sh
Traslates .eml file to maildir format.
#!/bin/bash
# Copyright (C) 2015
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of