YongHo, JI gcmcom

ANSI Escape Sequences

Standard escape codes are prefixed with Escape:

Ctrl-Key: ^[
Octal: \033
Unicode: \u001b
Hexadecimal: \x1B
Decimal: 27

Changing Favicons for node-red Dashboards

Dashboards created with node-red-dashboards all have the same favicon

You can easily change this by changing the icons in the .node-red/node-modules/node-red-dashboard/dist, but this change will be lost the next time you update node-red-dashboard.

To get a permanent change, add your icon as files icon64x64.png, icon120x120.png, and icon192x192.png to a folder of your choice, e.g. /home/nodereduser/.node-red/icons, where nodereduser is the user executing node-red.

Git Wars: GitHub vs Bitbucket

Introduction

Now, you might think the answer I'm going to give you is already obvious because I'm using GiHub right now, but it's not. Both GitHub and Bitbucket offer great Git services, but each has its own features and pricing plans. In the following... thing, I'm going to compare the two and then offer a final solution that should work for most people.

TL;DR: Both. Use GitHub for open source and public repos (you'll spend most of your time here) and Bitbucket for private repos. But, sign up for GitHub first, then import account into Bitbucket. Also, check comments for updates. P.S. I personally prefer GitHub.

	#!/bin/env python
	# expects python3
	################################################################################

	import argparse
	import socket
	import sys

	################################################################################

	#!/usr/bin/env python

	import socket
	import threading
	import select
	import sys

	terminateAll = False

	class ClientThread(threading.Thread):

	// Forked 'toFloat' from https://gist.github.com/laerciobernardo/498f7ba1c269208799498ea8805d8c30
	// Forked 'toHex' from stackoverflow answer https://stackoverflow.com/a/47187116/10522253
	// Modifyed by: Jozo132 (https://github.com/Jozo132)

	const Float32ToHex = (float32) => {
	const getHex = i => ('00' + i.toString(16)).slice(-2);
	var view = new DataView(new ArrayBuffer(4))
	view.setFloat32(0, float32);
	return Array.apply(null, { length: 4 }).map((_, i) => getHex(view.getUint8(i))).join('');
	}

	#include?"Wire.h"
	#define?tcn75address?0x4F?// with pins 5~7 set to GND, the device address is 0x48

	void setup()
	{
	??Wire.begin(); // wake up I2C bus
	??Serial.begin(115200);
	}

	float tcn75_getTemperature(int address)

YongHo, JI gcmcom

ANSI Escape Sequences

Changing Favicons for node-red Dashboards

Git Wars: GitHub vs Bitbucket

Introduction

Interface and Functionality