gresan-gits

const int ledPin = 16;
const int ledPin2 = 17;
const int ledPin3 = 5;

// setting PWM properties
const int freq = 5000;
const int ledChannel = 0;
const int resolution = 8;

void setup() {

gresan-gits

//**************************************************************//
//  Name    : 16Relay control via MQTT                            //
//  Author  : Son Bui-Mualinhkien.vn                             //
//  Date    : 23 March, 2016                                     //
//  Version : 1.0                                                //
//  Notes   : Code for using a 74HC595 Shift Register            //
//          : Change Maximum packet size on pubsubclient lib to 512 bytes
//          : https://play.google.com/store/apps/details?id=org.ngoinhaso.app.mqtthomecontrol  //App UI

//**************************************************************//

gresan-gits

#include <ex_usb_common.h>
#define MPU_SDA PIN_E0
#define MPU_SCL PIN_E1
#use I2C(master, sda=MPU_SDA, scl=MPU_SCL)
#use TIMER(TIMER=1, TICK=1ms, BITS=16, NOISR)
#define RAD_TO_DEG 180/PI
#define LCD_ENABLE_PIN PIN_D2
#define LCD_RS_PIN PIN_D0
#define LCD_RW_PIN PIN_D1
#define LCD_DATA4 PIN_D4

gresan-gits

//#use spi(FORCE_HW,master,baud = 10000000, BITS=8,MSB_FIRST, stream = RFID, ENABLE_ACTIVE=0)// uses hardware SPI and gives this stream the name SPI_STREAM
//MF522 Command word
#define PCD_IDLE              0x00               //NO action; Cancel the current command
#define PCD_AUTHENT           0x0E               //Authentication Key
#define PCD_RECEIVE           0x08               //Receive Data
#define PCD_TRANSMIT          0x04               //Transmit data
#define PCD_TRANSCEIVE        0x0C               //Transmit and receive data,
#define PCD_RESETPHASE        0x0F               //Reset
#define PCD_CALCCRC           0x03               //CRC Calculate
// Mifare_One card command word                 

gresan-gits

#include <16F877A.h>
#device ADC=10
#FUSES NOWDT                    //No Watch Dog Timer
#FUSES NOBROWNOUT               //No brownout reset
#FUSES NOLVP                    //No low voltage prgming, B3(PIC16) or B5(PIC18) used FOR I/O
#use delay(crystal=12MHz)
#define LED PIN_C1
#define DELAY 10
#define RC PIN_E0
#define LCD_ENABLE_PIN PIN_D2

gresan-gits

   /*** FILEHEADER ****************************************************************
 *
 *    FILENAME:    ds1820.h
 *    DATE:        25.02.2005
 *    AUTHOR:      Christian Stadler
 *
 *    DESCRIPTION: Driver for DS1820 1-Wire Temperature sensor (Dallas)
 *
 ******************************************************************************/

gresan-gits

#include <main.h>
/*
Cach tinh gia tri dutu thong qua set value
8bit value = period+1*duty_cycle
16bit value= 4*(period+1)*duty_cycle
*/

void main()
{
   setup_timer_2(T2_DIV_BY_4,124,1);      //100 us overflow, 100 us interrupt//Khoi tao timer 2 tao tan so pwm(10k)

gresan-gits

#include "main.h"
#define LED PIN_C0
#int_TIMER0
void  Ngat_TIMER0(void)
{
fprintf(PORT1,"Ngat timer 0\r\n");

}
#int_TIMER1
void  Ngat_TIMER1(void)

gresan-gits

#include <ext.h>
#define LED_BAO PIN_D0
#define LED_NGAT PIN_D1
#INT_EXT //chi thi khai bao ngat(Chuong trinh se thuc hien ham ngay sau chi thi)
void  ngatngoai0_isr(VOID) //ham thuch hien khi co ngat
{
   fprintf (DEBUG_PORT, "\r\nBat dau thuc hien ham trong ngat");
   output_toggle (LED_NGAT);
   for (INT i = 0; i < 10; i++)
   {

gresan-gits

#include <main.h>
#define LCD_ENABLE_PIN  PIN_B0                       
#define LCD_RS_PIN PIN_B1 
#define LCD_RW_PIN PIN_B2
#define LCD_DATA4 PIN_B4
#define LCD_DATA5 PIN_B5
#define LCD_DATA6 PIN_B6
#define LCD_DATA7 PIN_B7
#include <lcd.c>