WARNING: If you're reading this in 2021 or later, you're likely better served by reading:
(This gist was created in 2013 and targeted the legacy GOPATH mode.)
$ ssh -A vm
$ git config --global url."[email protected]:".insteadOf "https://github.com/"
| # Install ARCH Linux with encrypted file-system and UEFI | |
| # The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description. | |
| # Download the archiso image from https://www.archlinux.org/ | |
| # Copy to a usb-drive | |
| dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux | |
| # Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration. | |
| # Set swedish keymap |
| package main | |
| import ( | |
| "net/http" | |
| "database/sql" | |
| "fmt" | |
| "log" | |
| "os" | |
| ) |
First go to the Gobot Intel Edison Readme (https://github.com/hybridgroup/gobot/tree/master/platforms/intel-iot/edison#how-to-install) and follow the getting started guide. Your Edison has already been updated to the latest firmware version,
so you can skip that part! You will not need to download the Intel XDK, you only need to go through the steps detailing how to connect through the serial interface and then configure your edison.
Find the box called "Base Shield" and open that up and place the grove "Base Shield" onto your Intel Edison. This will allow you to use the Grove connectors shields and cables!