heartshare

Sure, here is the final Docker configuration for a Symfony 7.0 project with PHP 8.2, MySQL, Adminer, and FrankenPHP, including the necessary PHP extensions and a command for database creation.

First, the Dockerfile:

# Dockerfile
FROM php:8.2-fpm

# Install Composer
COPY --from=composer:latest /usr/bin/composer /usr/bin/composer

Laravel Octane Docker

Extremely simple Docker setup for Laravel projects with Laravel Octane, using the following application servers:

Open Swoole
Swoole
RoadRunner
FrankenPHP

Docker Images

Enable System IP forwarding first

echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf
echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf
sudo sysctl -p /etc/sysctl.conf

Here is sample network configuration (remove comments "##") Replace your interface name, public IP, internal NAT IP

CEPH HA Setup

Note this should only be done once you are sure you have reliable TB mesh network.

this is because proxmox UI seems fragile wrt to changing underlying network after configuration of ceph.

All installation done via command line due to gui not understanding the mesh network

This setup doesn't attempt to seperate the ceph public network and ceph cluster network (not same as proxmox clutser network), The goal is to get an easy working setup.

this gist is part of this series

	FROM node:20.15.1 as frontend_build
	ENV PNPM_HOME="/pnpm"
	ENV PATH="$PNPM_HOME:$PATH"
	RUN corepack enable

	WORKDIR /app

	RUN npm install -g terser uglifycss autoprefixer postcss sass
	COPY ./mapas/src/package.json /app
	COPY ./mapas/src/pnpm-*.yaml /app

	FROM dunglas/frankenphp:latest-php8.2

	# install the PHP extensions we need (https://make.wordpress.org/hosting/handbook/handbook/server-environment/#php-extensions)
	RUN install-php-extensions \
	bcmath \
	exif \
	gd \
	intl \
	mysqli \
	zip \

	# scripts/00-laravel-deploy.sh

	php artisan route:cache
	php artisan view:cache
	php artisan config:cache
	php artisan migrate --force

	# syntax=docker/dockerfile:1.4

	FROM node:21-alpine AS front
	WORKDIR /usr/src/app
	COPY --link package.json yarn.lock .yarnrc.yml ./
	COPY --link .yarn .yarn
	RUN yarn install
	COPY --link tailwind.config.ts postcss.config.cjs vite.config.ts tsconfig.json tsconfig.node.json ./
	COPY --link resources resources
	RUN yarn build

	#!/bin/bash
	# Full path to tc binary

	TC=$(which tc)

	#
	# NETWORK CONFIGURATION
	# interface - name of your interface device
	# interface_speed - speed in mbit of your $interface
	# ip - IP address of your server, change this if you don't want to use

	<?php

	/**
	* Below is an the extended Filament resource your tenant panel resources
	* will have to extend so that the queries are scoped properly.
	*/

	namespace App\Filament;

	use Filament\Resources\Resource;